On Mon, December 31, 2012 7:07 pm, John Murphy wrote: > The "unwanted card" is hdmi sound on my graphics card and I don't > know if I can disable it. That may be a workaround if I can... I wanted my d66 to be hd:0. I have three cards: internal ac97 PCI ensoniq (used only for the midi port) D66 Normally I can disable the ac97 card in bios, but right now I have been testing things with it. In any case normally I have the two cards. They both use different drivers, so it is easy to determine which is hw:0. I went to /etc/modprobe.d/alsa-base.conf and found a lot of lines like: options snd-usb-ua101 index=-2 The -2 means load this module after all the others are done. So I added a line: options snd-ens1370 index=-2 now my ice1712 always ends up as hw:0 This trick does not work if two cards use the same driver. So try an lsmod and look for *snd* modules that have non rme things in them. Once you find the base driver for the hdmi, you can either load it last (as above) or black list so it never loads at all. -- Len Ovens www.OvenWerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
