On Fri, Sep 7, 2012 at 3:52 AM, Joakim Hernberg <jbh@xxxxxxxxxx> wrote:
the ADAT signal can be used to carry clock, but my experience with it has not been good. much better to use a separate word clock cable between different digital devices.
On Fri, 07 Sep 2012 04:15:20 +0200
Ralf Mardorf <ralf.mardorf@xxxxxxxxxxxxx> wrote:
> Because it's not in my price range too, I bought a HDSPe AIO B-stock,
> resp. customer return, for PCIe x1 slot + a cheap Behringer ADA8000,
> an ADAT device = 2 + 8 = 10 audio IOs, but the 2 of the card aren't
> in sync with the 8 from ADAT, when synced via ADAT only. However, RME
You would have to connect both ADAT out and in, when using the RME as
master clock, since the clock has to go via adat from the rme to the
ada8k device?
the ADAT signal can be used to carry clock, but my experience with it has not been good. much better to use a separate word clock cable between different digital devices.
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user