I understand Gnome Wave Cleaner is very good at getting rid of clicks
and pops.
On 03/04/2012 04:43 PM, Paul Davis wrote:
i use jack_capture to save to flac.
i have a music hall turntable, feeding a NAD preamp, which then feeds
my frontier designs tango24 ADC which feeds my RME audio interface.
the biggest obstacle: i have to manually create track boundaries or
per-track files *if* i want them.
second biggest obstacle: the music hall is a fully manual deck, so i
have to be there to both stop the recording *and* lift the tonearm off
the vinyl.
On 3/4/12, Adam<adam707@xxxxxxxxxxx> wrote:
Hello everyone! I just joined this list and already I feel I'm in
way over my head. :-) I have one simple question, but it definitely
involves using Linux for audio. In fact, it's such a simple and
common question that I'm almost embarrassed to ask the experts here
about it.
I've finally got my collection of analog sound recordings (LPs and
audiocassettes) down to the relatively few that aren't available in
any digital format but are worth preserving. That means I'll have
to digitize those myself. So --
Can anyone recommend (or disparage) any particular hardware and
software for digitizing sound recordings?
Here are some specifics about my equipment and my expectations:
Something close to CD quality or 320 kbps MP3s will be "good enough"
here. I'll be dealing only with existing stereo recordings. I
already have a turntable, receiver (including phono preamp), and
cassette deck, all working, that are IMO good enough. I also have
the 25' of audio cables (RCA plugs) necessary to connect my "stereo
system" to my computer, unless rearranging my entire room to bring
them closer together would make a significant difference.
At the computer end, I have an low-end Compaq desktop with
integrated audio (inadequate quality for input here) running
Mandriva 2010.0, an available PCIe-x16 slot and some USB 2.0 ports
(no Firewire), plus lots (hundreds of GBs) of free HD space. For
the new audio hardware, I'd prefer something that not only fits this
machine and runs well under Linux, but will also be usable in future
desktop Linux systems (e.g. not a plain PCI card if possible).
Anything that would fit into that PCIe x16 slot (I understand a PCIe
x1 card will work in a PCIe x16 slot) or a USB port -- I just need
something that will accept line-level stereo inputs. I'm hoping to
find something decent in the US $40-80 range, new or used.
For software, I thought I could use 'rec' to put the digitized audio
into some standard file format (and automatically split it into
tracks if desired), and 'audacity' for the digital signal processing
(noise reduction, declicking, etc.). Or are there other programs
that would be better for me, either in audio quality or ease of use?
Any recommendations for hardware or software, especially hardware,
would be very much appreciated! Suggestions on where else to look
for advice would be welcomed too. Thanks!
--
David
gnome@xxxxxxxxxxxxx
authenticity, honesty, community
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
