On Mon, Nov 7, 2011 at 8:18 PM, Tobiah <toby@xxxxxxxxxx> wrote: > I think that I've mentioned this is the > past, but I'm happy with what I'm doing, and I > wanted to share. > > Some of you may have felt at some time, a > difficulty with sticking with only Windows, or > only Linux for use as an audio workstation. I've > tried two machines with a kvm switch, and the > dual-boot thing. Finally I came to a quite happy > solution using "virtualization", running Linux in a > Vmware virtual machine on a Windows 7 host. I'll share what my setup is also, using Linux and Windows 7 side-by-side. I have them running on separate machines, each with its own monitor. I have a single mouse & keyboard, connected to my Linux box. Now here's the cool part: on the Windows box, I run VNC server. On the Linux side, I use a utility called x2vnc. I start x2vnc up and connect to the VNC server on Windows and voila! It's like having a twin monitor setup, I can easily move the mouse between monitors now, and the keyboard follows the mouse, no KVM needed (I have the keyboard & mouse going into a KVM switch, actually, but that's only for emergencies). All of my sequencing, recording & mixing is done on Linux, Windows is for hosting samplers. I send MIDI over IP from Linux to Windows (using QMidiNet on Linux and IpMIDI on Windows) to playback Kontakt or EWQL or whatever (hosted in Reaper), and audio comes back into Linux via SPDIF and Lightpipe (ADAT), so all of the audio plays back through Linux and my monitoring system, regardless of the source. -- Brett W. McCoy -- http://www.electricminstrel.com ------------------------------------------------------------------------ "In the rhythm of music a secret is hidden; If I were to divulge it, it would overturn the world." -- Jelaleddin Rumi _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
