Chuck, On 20/10/2011 21:54, Charles Henry wrote:
Hi, list I'm interested in getting feedback for a project, namely building an audio interface, with the goal of creating freely available schematics and code required. Hence, an Open Sound Interface.
This sounds very interesting. I wouldn't be able to contribute on the technical side at this stage I guess. But thumbs up from a potential user and maybe later tester, documenter, etc.! You already mentioned USB and FW which IMHO is good as this should also target the big 'proprietary gap' issuee in 'mobile' interfaces (i.e. Linux users are still forced to dig into devices which are supported in ffado etc.)
Recently on the list I shared a probably more ambitious idea, which is integrating an interface like this and making and Open Daw Laptop (so tu say), similar to Indamixx but with fairly hi-q audio interface. Unfortunately I don't have the hardware knowledge to express it as clearly as you did, but maybe in a later stage the idea could be resurrected :)
Lorenzo.
Once I've heard from all those interested, we may want to migrate the discussion to another development oriented list such as the linux-audio-dev list to work out nitty-gritty technical details. For now, it's enough just to gauge interest and deal with planning issues. The concept is to create a modular and scalable system that allows users to create a sound interface with an arbitrary number of input/output channels. Goals of the system: 1. low latency 2. isolate design considerations 3. abstraction of data transport types 4. flexibility of adc/dac/preamp combinations 5. no unnecessary features--keep it lean; niche features can be added in by those interested My idea for how to do it, and components/tasks to design: 1. Modules for dac and adc with on-board identifiers (mixed-signal design) 2. A FPGA-based programmable system board with connectors for respective modules (high-frequency circuit design) 3. FPGA code for buffers, clocks, and device discovery (VHDL/Verilog programming) 4. Data transport modules (FPGA code plus hardware design), could be USB, FW, ETH, PCI, wireless, etc... 5. Kernel modules for each type of transport (software design) 6. Power supplies (not especially difficult, but tough to find off-the-shelf components to meet specs) What I'm doing: studying VHDL coding and preparing to test I2C/SPI dacs on a Digilent Basys-2 board with breadboards (maybe over a few months) studying high frequency electronics design This sort of problem would take a good team to do well. There's room for many levels of software/hardware expertise, especially those who understand linux audio kernel modules (design for many parts of the system depend on capabilities to design for). It may be a chore, but some kind of organization and design documents will be needed. All the components are inter-related: it takes a combination of top-down (whole system) and bottom-up (per module) considerations to build a complete design. Any feedback, insights, practical considerations, and reasonable expectations for taking a complex project like this to completion would be welcome. Thanks, Chuck _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
