On 10/15/2011 02:20 PM, Jan Depner wrote:
On Sat, 2011-10-15 at 19:10 +0100, rob wrote:
On 15/10/11 18:49, Ketil Thorgersen wrote:
Hi list
I just gave away my UA25 to my son because I had a pci port on a
computer and this old but capable ice7212 based sound card lying in a
closet. I remember it even worked a couple of years ago in Linux.
Anyway - now it doesn't record. It plays ack fine, but I am not able
to make it record. This is on Ubuntu natty with KXstudio desktop and a
multimedia kernel. I've tried both the special mixer Envy24 control
end the later version. Even tried alsa mixer, but I cannot for the
life of figure out how to get a signal into the computer.
Everything looks good in qjackctl - 8 inputs/outputs etc.
Does anyone actually use this any longer? Any hints??
All the best
Ketil
There was an issue sometime ago with ice1712 cards and pulseaudio. I
don't know whether that applies in your case.
I've got the same card and I just loaded CentOS 6. Mine appears to work
OK but pulse is hosing up everything else. I can run through JACK and
direct to ALSA with Audacity but all other sound is hosed. Anyone know
how to kill Pulse?
You can edit the default pa configuration to let it know what to do with
all those channels (pa points a finger to alsa as the culprit, alsa has
never changed things to fit into the pa world, sigh...). An example of
what I did to /etc/pulse/default.pa for our Delta66 ice1712 based
soundcards. Works fine with pulse.
-- Fernando
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Load Delta 66 hardware
### (it is not recognized automatically)
###
load-module module-alsa-sink sink_name=delta_out device=hw:0 channels=10 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
load-module module-alsa-source source_name=delta_in device=hw:0 channels=12 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9
### Automatically load driver modules depending on the hardware available
#.ifexists module-udev-detect.so
#load-module module-udev-detect
#.else
### Alternatively use the static hardware detection module (for systems that
### lack HAL support)
#load-module module-detect
#.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP reciever module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user during runtime
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
load-module module-console-kit
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music streams when a phone stream is active
load-module module-cork-music-on-phone
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
set-default-sink delta_out
set-default-source delta_in
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
