Bernardo Barros wrote: > The manual says I must start the device holding the "1" button, to get > "full speed" USB1. > > Without this I can see the device, but I can't hear anything from it. > iManufacturer 1 Sound Devices > iProduct 2 USBPre2 > Interface Descriptor: > bInterfaceClass 1 Audio > bInterfaceSubClass 1 Control Device This is audio class 1.0. Please show the "lsusb -v" output for 192 kHz mode. > From the website: > > Class Compliant Drivers > > As a class-compliant audio device, the USBPre 2 is limited to a > maximum data rate of 24-bit, 48 kHz in Windows, Linux, and Mac OS > versions 10.4 to 10.5.7. > Mac OS 10.5.8 and higher support the audio class 2.0 device and can > address the USBPre 2 up to 24-bit, 192 kHz. Audio class 2.0 should work with Linux 2.6.35 (but an even newer kernel wouldn't hurt). Which kernel version are you using? Regards, Clemens _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
