On Sun, 14 Aug 2011 22:10:51 +0200
rosea grammostola <rosea.grammostola@xxxxxxxxx> wrote:
> On 08/14/2011 09:59 PM, Julien Claassen wrote:
> > Rosea!
> > How do you reach your slave computer from the master computer, say
> > by ping or ssh? That adress is the slave host. It's simple networking
> > stuff.
> People told me that it's not possible to use openssh over a crossover
> cable...
You shouldn't listen to those people - I do it all the time.
> It's no simple networking stuff apparently. Maybe I should
> explore that first, how to make connection via crossover cable (without
> JACK).
Actually, it *is* simple networking stuff, but it sounds like you don't
have the background for that. You have to know how to set IP addresses
manually, and a tiny bit about subnetting.
It will be much easier to set up the second machine the way you'd set
up any other machine, using a router that has a DHCP server to assign
the IP address and default route, etc. Even if for some reason you don't
have the machines you're playing with connected to a network, it'll still
be much easier doing this with a cheap router.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh@xxxxxxxxxxxx
Without deviation from the norm, "progress" is not possible. - FZappa
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
