Fri, 18 Feb 2011 14:22:54 +0100 письмо от Jeremy Jongepier <jeremy@xxxxxxxxxxxxxx>: > On 02/18/2011 01:43 PM, Mike Cookson wrote: > > Minicomputer is launched by command "minicomputer", connected > mix ports to card and virtual keyboard (vmpk) to synth. > > Now in gui: set mix and both aux volumes in amp to max, pan to middle, > and (again) volume of both oscillators (between their frames and filter > frames, right?), and still don't have sound. > > _______________________________________________ > > Linux-audio-user mailing list > > Linux-audio-user@xxxxxxxxxxxxxxxxxxxx > > http://lists.linuxaudio.org/listinfo/linux-audio-user > > Did you try any of the presets? If you are about "load sound" and "load multy", they all are untitled. > And to get it going maybe this article might be useful: > http://www.linuxjournal.com/content/give-me-3-synths-part-2 > And the manual if you'd like to dive in deeper: > http://minicomputer.sourceforge.net/minicomputerManual.pdf I already looked manual. I guess, actions, i made, should be enough. Btw, mt version is 1.41. Btw, now i saw minicomputer midi port (before i saw only miniEditor port :D ), and also connected all ports (aux, mix and separate voices) to card. But all these additional actions did not make sence. > > Best, > > Jeremy > _______________________________________________ > Linux-audio-user mailing list > Linux-audio-user@xxxxxxxxxxxxxxxxxxxx > http://lists.linuxaudio.org/listinfo/linux-audio-user _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
