On Sat, 11 Sep 2010, rosea grammostola wrote:
On Sat, Sep 11, 2010 at 3:12 PM, Kjetil S. Matheussen
<k.s.matheussen@xxxxxxxxxx> wrote:
On Sat, 11 Sep 2010, rosea grammostola wrote:
On Sat, Sep 11, 2010 at 2:20 PM, Kjetil S. Matheussen
<k.s.matheussen@xxxxxxxxxx> wrote:
rosea grammostola:
Hi,
Thanks for all the info so far.
I have gathered some components:
Processor: i5 750
Heatsink: ?
MB: Asus P7P55D
Memory: Corsair XMS3 4GB(2x2GB) PC3-10666
HDD: 2 x Western Digital WD5000AADS (Bulk, Caviar Green) (500GB)
Case: Antec SOLO
Fan: Nexus 120mm Real Silent case fan
DVD: Lite-On iHAS124 24xDVDRW
PSU: Seasonic S12II, 380Watt, ATX
Screen: Lenovo L1951p 19" or ThinkVision L197 19inch (1440x900) Wide
Flat Panel LCD (Analog/Digital) HDCP TCO 03,MPR-II
That cabinet has the PSU placed at the top.
If you want a silent case, but one which is cheaper
than antec p183, maybe fractal design could
be an alternative?
Thanks.
I didn't see scientific sources which confirms that the 'PSU on bottom
approach' is better ;)
I was thinking to follow this approach
http://www.silentpcreview.com/article826-page1.html
It just needs one fan...
Bad design. He says himself that:
"The dedicated intake duct ensures that the PSU fan never ramps up unless
absolutely needed. In actual use, it should just about never ramp up except
maybe in very hot weather under long term high load conditions."
"Long term high load conditions" is something you probably
experience when working with audio. Even just watching a web
page with flash cause high long term CPU usage. There's nothing
more irritating than fans suddenly ramping up.
Ok, but it would be nice if you could provide some sources which makes
clear that and why the bottom PSU approach is better.
I'm just talking out of experience. The PSU is usually the noisiest part
in a computer if its heated, and if you put it at the top, especially
right above the CPU, it becomes too warm. I avoided this problem in one
computer I build (an antec SOLO case BTW) by replacing the fan in
the PSU so that it pused air towards the CPU instead of the other way,
but the easiest way to avoid PSU noise is just to put the PSU
at the bottom.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
