On 08/27/2010 10:25 PM, Orcan Ogetbil wrote: >> Anyone know what should be done next? > Hmm. I don't think that /usr/lib64/ladspa/ladspa-rubberband.cat is > causing the error you are experiencing. As far as I understand, > non-mixer is browsing through each file in that directory, and > searching for a ladspa plugin. If it can't find something it spits a > warning. Just put some random file in there you will get another > warning. Or move the .cat file elsewhere, the warning will be gone. I was hoping that that was the case :-) > Sorry, this is partly my fault because I read your initial message as > Warning: ... ladspa-rubberband.so rather than ladspa-rubberband.cat > > I also get the same warning with the .cat file but after the > 286 plugins found in 144 libraries > line, my mixer launches, and when I quit the application deliberately, I get > [non-mixer] Your fun is over > > Your system quits the application unexpectedly. This will probably > need some debugging. I may have time to look into it next week, but it > would possibly be better to contact the actual developers. I am CC'ing this to J.M. Liles. I appreciate the architecture and design of non-mixer, and would very much like to help the project along. I have also done a certain amount of packaging; perhaps I might try my hand, once I understand things better. > I had plans to package non* stuff for Fedora, but I never had the time > to sit down and do it. It is, however, in our wishlist: > https://fedoraproject.org/wiki/AudioCreation > > Orcan Actually, the system no longer quits the application entirely unexpectedly, thanks to your input and others' we have moved considerably beyond that. Now, it segfaults when I attempt to remove any LADSPA plugin from a channel. Attached below is most of the compilation and the full run of a debug build, including loading up of my non-mixer setup, up to the point (the segfault) of removing a LADSPA plugin. It doesn't matter which LADSPA plugin, I think; I've tried adding and removing several different ones, it just segfaults. The segfault itself is listed in /var/log/messages (for this debug build) as: Aug 28 10:37:05 youngdavid kernel: non-mixer[17371]: segfault at 48 ip 000000000040b508 sp 00007fffa7c21e10 error 4 in non-mixer[400000+57000] J.E.B. ------ FL/Boxtypes.C:118: warning: array subscript has type ‘char’ FL/Boxtypes.C:127: warning: array subscript has type ‘char’ FL/Boxtypes.C:131: warning: array subscript has type ‘char’ FL/Boxtypes.C:133: warning: array subscript has type ‘char’ FL/Boxtypes.C:137: warning: array subscript has type ‘char’ FL/Boxtypes.C:146: warning: array subscript has type ‘char’ FL/Boxtypes.C:148: warning: array subscript has type ‘char’ FL/Boxtypes.C:152: warning: array subscript has type ‘char’ FL/Boxtypes.C:154: warning: array subscript has type ‘char’ FL/Boxtypes.C: In function ‘void shade_rect(int, int, int, int, const char*, Fl_Color)’: FL/Boxtypes.C:184: warning: array subscript has type ‘char’ FL/Boxtypes.C:192: warning: array subscript has type ‘char’ FL/Boxtypes.C:220: warning: array subscript has type ‘char’ FL/Boxtypes.C:228: warning: array subscript has type ‘char’ FL/Boxtypes.C:239: warning: array subscript has type ‘char’ FL/Boxtypes.C: In function ‘void shade_round(int, int, int, int, const char*, Fl_Color)’: FL/Boxtypes.C:262: warning: array subscript has type ‘char’ FL/Boxtypes.C:268: warning: array subscript has type ‘char’ FL/Boxtypes.C:289: warning: array subscript has type ‘char’ FL/Boxtypes.C:295: warning: array subscript has type ‘char’ FL [ 27%] FL/Fl_Arc_Dial.C FL [ 36%] FL/Fl_Menu_Settings.C FL/Fl_Menu_Settings.C:249: warning: unused parameter ‘pmax’ FL [ 45%] FL/Fl_Scalepack.C FL [ 54%] FL/Fl_Text_Edit_Window.C FL [ 63%] FL/New_Project_Dialog.C FL/New_Project_Dialog.C: In member function ‘Fl_Double_Window* New_Project_Dialog::make_window()’: FL/New_Project_Dialog.C:104: warning: ‘v’ is used uninitialized in this function FL [ 72%] FL/color_scheme.C FL [ 81%] FL/event_name.C FL [ 90%] FL/menu_popup.C FL [100%] FL/test_press.C Calculating dependencies...done TIMELINE [ 3%] src/Annotation_Region.C TIMELINE [ 6%] src/Audio_Region.C src/Audio_Region.C:334: warning: unused parameter ‘X’ src/Audio_Region.C:334: warning: unused parameter ‘W’ TIMELINE [ 9%] src/Audio_Sequence.C TIMELINE [ 12%] src/Control_Point.C TIMELINE [ 15%] src/Control_Sequence.C TIMELINE [ 18%] src/Engine/Audio_File.C TIMELINE [ 21%] src/Engine/Audio_File_Dummy.C TIMELINE [ 24%] src/Engine/Audio_File_SF.C src/Engine/Audio_File_SF.C: In static member function ‘static Audio_File_SF* Audio_File_SF::from_file(const char*)’: src/Engine/Audio_File_SF.C:88: warning: label ‘invalid’ defined but not used TIMELINE [ 27%] src/Engine/Audio_Region.C TIMELINE [ 30%] src/Engine/Audio_Sequence.C TIMELINE [ 33%] src/Engine/Control_Sequence.C TIMELINE [ 36%] src/Engine/Disk_Stream.C TIMELINE [ 39%] src/Engine/Engine.C TIMELINE [ 42%] src/Engine/Peaks.C TIMELINE [ 45%] src/Engine/Playback_DS.C TIMELINE [ 48%] src/Engine/Record_DS.C TIMELINE [ 51%] src/Engine/Timeline.C TIMELINE [ 54%] src/Engine/Track.C TIMELINE [ 57%] src/Project.C TIMELINE [ 60%] src/Sequence.C src/Sequence.C:143: warning: unused parameter ‘start’ src/Sequence.C:143: warning: unused parameter ‘length’ TIMELINE [ 63%] src/Sequence_Point.C TIMELINE [ 66%] src/Sequence_Region.C TIMELINE [ 69%] src/Sequence_Widget.C TIMELINE [ 72%] src/TLE.C src/TLE.C:931: warning: unused parameter ‘w’ TIMELINE [ 75%] src/Tempo_Point.C TIMELINE [ 78%] src/Tempo_Sequence.C TIMELINE [ 81%] src/Time_Point.C TIMELINE [ 84%] src/Time_Sequence.C TIMELINE [ 87%] src/Timeline.C TIMELINE [ 90%] src/Track.C TIMELINE [ 93%] src/Transport.C TIMELINE [ 96%] src/Waveform.C TIMELINE [100%] src/main.C Linking timeline...done Calculating dependencies...done MIXER [ 5%] src/Chain.C MIXER [ 11%] src/Controller_Module.C MIXER [ 16%] src/DPM.C MIXER [ 22%] src/Engine/Engine.C MIXER [ 27%] src/Gain_Module.C MIXER [ 33%] src/JACK_Module.C MIXER [ 38%] src/LADSPAInfo.C MIXER [ 44%] src/Meter_Indicator_Module.C MIXER [ 50%] src/Meter_Module.C MIXER [ 55%] src/Mixer.C src/Mixer.C: In member function ‘bool Mixer::command_load(const char*, const char*)’: src/Mixer.C:554: warning: unused variable ‘err’ MIXER [ 61%] src/Mixer_Strip.C MIXER [ 66%] src/Module.C MIXER [ 72%] src/Module_Parameter_Editor.C MIXER [ 77%] src/Mono_Pan_Module.C MIXER [ 83%] src/Panner.C MIXER [ 88%] src/Plugin_Module.C MIXER [ 94%] src/Project.C MIXER [100%] src/main.C Linking mixer...done [jeb@youngdavid daw]$ sudo make install for dir in nonlib FL timeline mixer; do make -s -C $dir install; done ... ... Installing...done Installing...done [jeb@youngdavid daw]$ non-mixer [non-mixer] src/Plugin_Module.C:272 discover_thread(): Discovering plugins in the background WARNING: File /usr/lib64/ladspa/ladspa-rubberband.cat could not be examined dlerror() output: /usr/lib64/ladspa/ladspa-rubberband.cat: invalid ELF header 130 plugins found in 103 libraries [non-mixer] src/Project.C:144 read_info(): Info: created by = The Non-Mixer 1.0.0 [non-mixer] src/Project.C:144 read_info(): Info: created on = Thu Aug 26 22:27:17 2010 [non-mixer] src/Project.C:144 read_info(): Info: version = 1 src/Mixer_Strip.C:212 cb_handle(): Callback for (null) src/Mixer_Strip.C:212 cb_handle(): Callback for (null) [non-mixer] src/Mixer.C:304 add(): Add mixer strip "Yoshimi" src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 0:1 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Plugin_Module.C:413 load(): Name: Calf Compressor LADSPA [non-mixer] src/Plugin_Module.C:432 load(): Plugin has 2 inputs and 2 outputs [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Threshold" (default: 0.250732) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Ratio" (default: 1.000000) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Attack" (default: 4.472136) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Release" (default: 94.574158) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Makeup Gain" (default: 1.000000) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Knee" (default: 2.750000) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Detection" (default: 0.000000) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Stereo Link" (default: 0.000000) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "A-weighting" (default: 0.000000) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Compression" (default: 0.000000) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Peak Output" (default: 0.000000) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "0dB" (default: 0.000000) [non-mixer] src/Plugin_Module.C:584 load(): Plugin has control port "Bypass" (default: 0.000000) [non-mixer] src/Plugin_Module.C:345 plugin_instances(): Instantiating plugin... [non-mixer] src/Plugin_Module.C:353 plugin_instances(): Instantiated: 0x7e2180 [non-mixer] src/Plugin_Module.C:357 plugin_instances(): Connecting control ports... src/Module.C:286 set_parameters(): 0.125000 src/Module.C:286 set_parameters(): 2.000000 src/Module.C:286 set_parameters(): 20.000000 src/Module.C:286 set_parameters(): 250.000000 src/Module.C:286 set_parameters(): 2.000000 src/Module.C:286 set_parameters(): 2.828427 src/Module.C:286 set_parameters(): 0.000000 src/Module.C:286 set_parameters(): 0.000000 src/Module.C:286 set_parameters(): 0.000000 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/Plugin_Module.C:217 configure_inputs(): Cross-wiring plugin inputs [non-mixer] src/Chain.C:533 insert(): Module "Plugin" has 1:2 audio and 10:3 control ports [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/Chain.C:533 insert(): Module "Gain" has 2:2 audio and 1:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Gain" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 [non-mixer] src/Chain.C:533 insert(): Module "Meter" has 2:2 audio and 0:1 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Meter" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 src/Module.C:286 set_parameters(): 2.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 2:0 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 2 src/Mixer_Strip.C:212 cb_handle(): Callback for (null) src/Mixer_Strip.C:212 cb_handle(): Callback for (null) [non-mixer] src/Mixer.C:304 add(): Add mixer strip "Gig Piano" src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 0:1 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/Chain.C:533 insert(): Module "Gain" has 1:1 audio and 1:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Gain" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "Meter" has 1:1 audio and 0:1 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Meter" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 1:0 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Mixer_Strip.C:212 cb_handle(): Callback for (null) src/Mixer_Strip.C:212 cb_handle(): Callback for (null) [non-mixer] src/Mixer.C:304 add(): Add mixer strip "Hydrogen" src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 0:1 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/Chain.C:533 insert(): Module "Gain" has 1:1 audio and 1:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Gain" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "Meter" has 1:1 audio and 0:1 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Meter" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 1:0 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Mixer_Strip.C:212 cb_handle(): Callback for (null) src/Mixer_Strip.C:212 cb_handle(): Callback for (null) [non-mixer] src/Mixer.C:304 add(): Add mixer strip "Aux In" src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 0:1 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/Chain.C:533 insert(): Module "Gain" has 1:1 audio and 1:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Gain" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "Meter" has 1:1 audio and 0:1 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Meter" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 1:0 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Mixer_Strip.C:212 cb_handle(): Callback for (null) src/Mixer_Strip.C:212 cb_handle(): Callback for (null) [non-mixer] src/Mixer.C:304 add(): Add mixer strip "Unnamed.4" src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 0:1 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/Chain.C:533 insert(): Module "Gain" has 1:1 audio and 1:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Gain" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "Meter" has 1:1 audio and 0:1 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Meter" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 1:0 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Mixer_Strip.C:212 cb_handle(): Callback for (null) src/Mixer_Strip.C:212 cb_handle(): Callback for (null) [non-mixer] src/Mixer.C:304 add(): Add mixer strip "Unnamed.5" src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 0:1 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/Chain.C:533 insert(): Module "Gain" has 1:1 audio and 1:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Gain" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "Meter" has 1:1 audio and 0:1 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Meter" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 1:0 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Mixer_Strip.C:212 cb_handle(): Callback for (null) src/Mixer_Strip.C:212 cb_handle(): Callback for (null) [non-mixer] src/Mixer.C:304 add(): Add mixer strip "Unnamed.6" src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 0:1 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/Chain.C:533 insert(): Module "Gain" has 1:1 audio and 1:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Gain" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "Meter" has 1:1 audio and 0:1 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Meter" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 1:0 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Mixer_Strip.C:212 cb_handle(): Callback for (null) src/Mixer_Strip.C:212 cb_handle(): Callback for (null) [non-mixer] src/Mixer.C:304 add(): Add mixer strip "Unnamed.7" src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 0 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 0:1 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/Chain.C:533 insert(): Module "Gain" has 1:1 audio and 1:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Gain" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "Meter" has 1:1 audio and 0:1 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "Meter" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 1.000000 [non-mixer] src/JACK_Module.C:184 handle_control_changed(): Adjusting number of inputs (JACK outputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 src/Module.C:286 set_parameters(): 0.000000 [non-mixer] src/JACK_Module.C:191 handle_control_changed(): Adjusting number of outputs (JACK inputs) [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Chain.C:533 insert(): Module "JACK" has 1:0 audio and 2:0 control ports src/Mixer_Strip.C:296 handle_module_added(): Connecting controls to default module "JACK" [non-mixer] src/Chain.C:336 configure_ports(): required_buffers = 1 [non-mixer] src/Project.C:287 open(): Loaded project "/home/jeb/non-mixer-jeb/non-mixer-jeb/" src/Module.C:480 menu_cb(): Bypass src/Module.C:480 menu_cb(): Remove Segmentation fault [jeb@youngdavid daw]$ _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
