> I'd try a pair of cheap "measurement" mikes like the T-bone MM-1, > Behringer ECM8000 etc. They're omni and the capsule is certainly > small ! The Behringers are very noisy, and they vary wildly in characteristics from unit to unit. They're literally made with whatever was cheapest that day from any given supplier. I use them as 'starting points' for building nicer calibrated mics because I can reuse the bodies, PCB and connector. And for $39, that's cheaper than starting from raw components. But the first thing I do is toss the capsules and half the electronics on the board. They're literally hilarious on the inside. In short--- they're worth the $40 as parts, but not quite as a mic. Monty _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
