On Saturday 08 May 2010 13:09:27 Fernando Lopez-Lezcano wrote: > On Fri, 2010-05-07 at 19:17 -0400, Geoff King wrote: > > Hello, > > I have problem that I've been trying to figure out with no luck. The > > audio interface keeps changing for example: > > > > Today: Maudio 24/96 is hw:1 and Midisport 4x4 Anniv is hw:0. > > Yesterday before reboot: Maudio 24/96 is hw:0 and Midisport 4x4 Anniv is > > hw:1 etc, back and forth, each reboot... > > I usually use qjackctl and have to keep changing the presets with > > settings which is annoying. > > > > I would greatly appreciate it if someone could provide me some clues > > or links on how to fix this? > > > > I'm Using Fedora 12 w CCRMA. > > While you can force the order with the proper index=xx incantations in > modprobe.d/ files, that will fail if the computer is booted with a usb > sound card attached. > > The proper fix is to not use the index (a number) when addressing the > card but use the name of the card. That will never change across > reboots. So, instead of "hw:0" use "hw:NAME" where NAME is what is shown > between square brackets in the output of cat /proc/asound/cards Does this solve the identical sound card problem in any way? Say two identical usb sound cards at the low and and two delta 1010's a little further up the chain as examples. > > -- Fernando > all the best, drew _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
