Excerpts from Geoff King's message of 2010-05-08 01:17:39 +0200: > Hello, > I have problem that I've been trying to figure out with no luck. The > audio interface keeps changing for example: > > Today: Maudio 24/96 is hw:1 and Midisport 4x4 Anniv is hw:0. > Yesterday before reboot: Maudio 24/96 is hw:0 and Midisport 4x4 Anniv is hw:1 > etc, back and forth, each reboot... > I usually use qjackctl and have to keep changing the presets with > settings which is annoying. > > I would greatly appreciate it if someone could provide me some clues > or links on how to fix this? > > I'm Using Fedora 12 w CCRMA. > > thanks, Geoff The easiest solution might be, using my setup as example: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: UA25 [UA-25], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 So I use hw:UA25 in jack instead of hw:0 Jack always uses this device if it can find it, it always just works. If you have multiple other devices you need hardwired you might need some other trickery, but I guess in your case it's a simple matter of figuring out the right name for the maudio interface. -- Regards, Philipp _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
