Same problem over here, after installing fltk2 the fltk/Color.h problem was solved and it installed correctly.
Now on the startup stage I'm getting this error, which seems to be related to jack or midi setup:
Error, failed to start jack midi thread: 1
So sad, failed to start MusicIO
***** here's the entire output:
diego@diego-laptop:~$ /usr/bin/jackd -dalsa -dhw:0,0 -r44100 -p1024 -n2 &
[1] 8456
diego@diego-laptop:~$ no message buffer overruns
jackd 0.116.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
SSE2 detected
apparent rate = 44100
creating alsa driver ... hw:0,0|hw:0,0|1024|2|44100|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
diego@diego-laptop:~$
diego@diego-laptop:~$
diego@diego-laptop:~$ yoshimi
SSE2 detected
Error, failed to start jack midi thread: 1
So sad, failed to start MusicIO
Yoshimi stages a strategic retreat :-(
Floating point exception
diego@diego-laptop:~$
diego@diego-laptop:~$
Any idea on this error?
Thank you very much in advance,
BR
Diego
2010/1/13 David Adler <david.jo.adler@xxxxxxxxx>
On Tue, Jan 12, 2010 at 8:26 PM, cal wrote:The sourceforge link seems to be outdated, still on version 0.047.1.
> The main change in 0.051 is to the recorder start logic, which sort of goes like -
> - Select your wav file, and the recorder becomes armed.
> - When armed, recording starts with the first note-on event, or a click on
> the Record button.
> - When armed, a click on the Stop button disarms the recorder.
> - When recording, a click on the Stop button stops the recorder, leaving it
> armed.
>
> <http://sourceforge.net/projects/yoshimi/files/>
>
No problen, good old
http://www.graggrag.com/?q=node/19
is up to date.
A build error:
/home/abs/yoshimi/src/yoshimi-0.051/src/MasterUI.h:28:24: error:
fltk/Color.h: No such file or directory
[...]
Aborting...
installing fltk2 resolved it.
Next, on startup:
$ yoshimi
gzopen failed, errno 2, No such file or directory
Error, xml file /home/user/.zynaddsubfxXML.cfg could not be loaded or
uncompressed
BUG!: XMLwrapper::peek() - empty parentstack
BUG!: XMLwrapper::peek() - empty parentstack
I found a .zynaddsubfxXML.cfg online from trinity. With that it
worked, though with an unusual layout.
I unsuccessfully looked for other .cfg files to use (using google
and searching zynadd 2.4.0/zynadd git). I'd love to have
one that gives the old layout.
The whole story is the same with yoshimi 0.052-pre1
Thanks for zyn, thanks again for yoshimi,
best,
d
> Bon apetit.
>
thanks, tasty miso soup on my table :)
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
