|
For this round I have decided to work on determining the audio
stability of the two systems running together with a broad test suite
of desktop apps that a normal user might use on a daily basis. In qjackctl l have added the command "pulseaudio -k" to the "run before starting" config option and the command to restart "pulseaudio -D -nF ~/jackd.pa" to the "run after starting" config option. (Since starting this round I have also run pulseaudio as a jack client overnight with no load. It was still connected in the morning so that is a good sign.) The jackd.pa script was posted Thursday in round 3. PA 0.9.16 will happily go down when told to with "pulseaudio -k" PA will restart and load the jack-sink/source modules I can play an audio file with totem->PA->jack while also playing a track with alsaplayer->jack. I have found that PA doesn't last for long while playing audio. While playing totem it will dropout after about 3 - 5 minutes then PA will go down. Disconnecting alsaplayer from jack that can also bring down PA. So far no problems with youtube/libflashplayer(64) but I haven't tested it for more than a minute as it is the last thing I have got working through PA. +++++++++++++++ RESULTS - Round 6 +++++++++++++++ Winners Pulse. Managed to take out Jack and the alsa drivers and still able to be used afterwards without a reboot. Jack. Survived repeated possible serious threats from pulse instability. Although eventually taken out by alsa drivers. Was able to come back up without a reboot. libflashplayer (64bit). After linking the three alsa-pulse libraries from /usr/lib64/alsa-lib to /usr/lib/alsa-lib I can play flash over pulseaudio. Would like to get libflashplayer to use /usr/lib64/ as the path but it seems to be hardcoded to /usr/lib/. Loosers Firefox. Quite a long process to figure out how to get the flash plugin working through pulse audio. No matter what I do I can't get the realplayer plugins to play through pulseaudio. That means if I want to look at a webpage while I have some background music running I won't hear any sounds on it. It also means that if I am listening to a radio stream I won't hear my system sounds. It also means I have to kill firefox if I want to start jack. Skype. Still can't get it to play audio through pulse. Case made even less likely now that I have linked the 64 bit libs to get libflashplayer to work. What is so hard about linking to /usr/lib64/ that the adobe developers have decided not to use that method? ++++++++++++++++++++++++++++++++++++++++++++++++ TESTS (included here as a web resource) ++++++++++++++++++++++++++++++++++++++++++++++++ - I would like to try another app instead of totem so I try to use firefox and stream some audio off the web with a flash/realplayer based radio (BBC - Benji B). Unfortunately this version of firefox 3.5.2 wants to use alsa directly. I try to find the firefoxrc file to add a hook for sound playback but cannot. I decide to make my own ".mozilla/firefox/rc" and add the following line: FIREFOX_DSP="padsp" - Now I find that after pulse last went down it has now left a stale connection in the jack system. I cannot restart pulseaudio. Alsaplayer is still playing. It's been about 30 minutes of playback now. I decide to restart jack. Now I can't restart. It looks like the drivers have been fsckd. I kill the alsa system. Have to run this a couple of times to get things to fully die. /etc/init.d/alsasound stop Then restart with "modprobe snd-hda-intel" Now I restart jack by pressing the start button in qjcakctl which runs the srcipts as described above. I see only the system input channels in the connections window. Looks like the alsa drivers have had a rough time with the last take down. And I see this in the messages window. =================================================== start client event poll on 14 for back from client event poll server thread back from poll marking client PulseAudio trying to lock graph to we have problem clients ++ Removing failed clients ... client alsa_pcm error status 0 client qjackctl error status 0 client PulseAudio JACK Source removing failed client removing client "PulseAudio removing client "PulseAudio +++ deactivate PulseAudio ++ jack_sort_graph ++ jack_rechain_graph(): +++ client is now alsa_pcm +++ client is now qjackctl client qjackctl: start_fd=7, client event poll on 14 for back from client event poll client qjackctl: wait_fd=9, -- jack_rechain_graph() -- jack_sort_graph -- Removing failed clients ... after removing clients, start poll on 4 fd's 15:04:01.839 Post-startup script 15:04:01.840 JACK connection change. 15:04:01.841 XRUN callback (1 load = 3.9610 max usecs: load = 2.3860 max usecs: load = 1.5750 max usecs: =================================================== Looks like a serious pulseaudio problem this time. Maybe I have to reboot? I stop jack and run "pulseaudio -D" instead and it works. I check the audio input and output tabs. There is no alsa input but the output is there. Conflicting reports from pulse and jack about the device i/o's is not a good thing. I kill the sound drivers again, reload the alsa driver with "modprobe snd-hda-intel" and start pulse with "pulseaudio -D". Things are back to normal in pulse now. Totem will play but no there's no sound in my speakers. I start alsamixer and notice that the channel for the headphone jack is set to zero and muted. This was not like that before I took the alsa drivers out. Seems strange the system did not save that setting seperately. All the other settings are the same as previously so it must be to do with the irq for the headphone jack not being triggered or somthing like that. I select the headphone channel, press "m" to unmute and turn up the volume and find that the track totem is playing can now be heard. Still no audio from the BBC through firefox+realplayer. Bummer. I restart firefox and can play the stream but now totem will not play so my settings in the rc file have not worked. - I decide to test jack again. I stop the bbc stream and close the popup window. I start jack but it cannot start. I close totem even though it is not playing and still cannot start. I kill firefox and now I can start jack. This time round the alsa i/o's are back and pulse has joined the party again. Looks like there is a firefox issue with letting go of the sound device after being used that is probably a major source of headaches and frustration for a lot of people. I would like to know how to make sure the firefox uses pulseaudio seeing as the only suggestion I could find didn't work. I try putting the rc file in /etc/fireforx/firefoxrc and restarting firefox. Firefox still doesn't show up in the "Sound Preferences" panel. - I follow the instructions on this page: http://pulseaudio.revolutionlinux.com/PulseAudio and this mod to the libflashsupport: Change line 3: from CFLAGS=-fPIC -shared -O2 -Wall -Werror to CFLAGS=-fPIC -shared -O2 -Wall and rerun: make ;make install; This is supposed to fix all the pulse issues as the 64bit version uses pulse natively as the default sound device and falls back to alsa if it can't find pulse. Restart firefox and open up http://www.youtube.com/watch?v=EfSwEaeOsJE&feature=channel No sound but video plays... Open up the BBC radio and stream refuses to start playing. No doubt waiting for the alsa device to become available. try reinstalling: yum install alsa-plugins-pulseaudio.i586 Same error messages as skype while playing youtube videos: socket(): Address family not supported by protocol ALSA lib pulse.c:272:(pulse_connect) PulseAudio: Unable to connect: Connection refused - At this point I have to concede that it is looking grim for being able to use Pulse as the catch all for desktop software and running Pulse through jack. So I ask on the pulseaudio list for some ideas on how to get around it. The answer is that I have to compile and install a 32 bit version of pulse libs on my 64 bit system. Lovely. I try installing the 32 bit packages from Fedora base but that procedure creates a problem with the flash plugin as now it will only report: ALSA lib pulse.c:272:(pulse_connect) PulseAudio: Unable to connect: Connection refused I'm not even sure why the the 64 bit version of libflashplayer is looking for the 32 bit pulse libs. As a possible fix I add this to my ~/.asoundrc pcm.!dmix { type pulse } Restart firefox. No sound from the libflashplayer-64 plugin through pulse. Same error as above. Cannot find 32 bit library. Decide to link the 64 bit libs to the 32 bit folder. This time I link all the pulse libs instead of the one reported as missing. ln /usr/lib64/alsa-lib/libasound_module_*_pulse.so /usr/lib/alsa-lib/ Restart firefox and flash is not complaining about a missing library any more. Check "Sound Preferences" to see if teh stream is being played through pulse and I can see the "ALSA plug-in [npviewer.bin]". Volume is set to 100% but still cannot hear any sound. Test alsaplayer with jack and sound is working. So must be something wrong with the pulse connection. Check the output for pulse and it has managed to set itself to my (HDMI) outputs for some reason. I change it to jack-sink. Flash movie has stopped playing... Restart the video and Viola!!!! The libflashplayer-64 plugin sound is now working through pulse and jack. Full instructions have been sent for this in my previous post. ---------------- Realplayer ---------------- - I notice that this error message is being reported by firefox at startup: LoadPlugin: failed to initialize shared library /opt/real/RealPlayer/mozilla/nphelix.so [/opt/real/RealPlayer/mozilla/nphelix.so: wrong ELF class: ELFCLASS32] That looks like it should be easy to fix. I find a 64 bit version of the Helix nightly build. Dowload, untar (make sure it has it's own folder though), run helix.bin and ... ./hxplay.bin: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory I try the quick and dirty method... ln -s /usr/lib64/libstdc++.so.6 /usr/lib64/libstdc++.so.5 ./hxplay.bin: /usr/lib64/libstdc++.so.5: version `CXXABI_1.2' not found (required by ./hxplay.bin) ./hxplay.bin: /usr/lib64/libstdc++.so.5: version `GLIBCPP_3.2' not found (required by ./hxplay.bin) Damn. Now I need an old version of libstdc++ in order to run the lastest 64 bit build of helix/realplayer on Fedora 11. What's even more annoying is the the 32 bit build of realplayer can install and run on the same machine. The plugin loads and runs in firefox even with the 32bit incompatibility error and plays audio directly to the alsa layer but not to the pulseaudio layer. Bizzare! Luckily I find that there is a compatibility library: yum install compat-libstdc++-33 Now I can run the helix installer which works very well. However now the player doesn't load in the browser popup. I also get these errors: ================ *** NSPlugin Wrapper *** ERROR: NPP_DestroyStream() wait for reply: Connection closed *** NSPlugin Wrapper *** WARNING:(../src/npw-wrapper.c:2123):invoke_NPP_URLNotify: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(../src/npw-wrapper.c:1858):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x7f9931e7d4d0 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPP_DestroyStream() wait for reply: Connection closed *** NSPlugin Wrapper *** WARNING:(../src/npw-wrapper.c:2123):invoke_NPP_URLNotify: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(../src/npw-wrapper.c:1977):invoke_NPP_GetValue: assertion failed: (rpc_method_invoke_possible(plugin->connection)) ================ I try to uninstall and reinstall but it is very difficult to uninstall being that there is no uninstall script and the script that is provided if you download directly from the last entry in the helix Faq doesn't actually work because as well as deleting the player from the system you also need to : rm -rf ~/.config/helix/hxplayerrc Reinstall helix export PATH=$PATH:/opt/real/helix restart firefox load up bbc player Now I get this error from firefox. *** NSPlugin Wrapper *** ERROR: NPP_DestroyStream() wait for reply: Connection closed *** NSPlugin Wrapper *** WARNING:(../src/npw-wrapper.c:2123):invoke_NPP_URLNotify: assertion failed: (rpc_method_invoke_possible(plugin->connection)) Patrick Shirkey Boost Hardware Ltd |
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
