On Sat, Jan 24, 2009 at 10:46:23PM -0700, Erik Nomitch wrote:
> I need a good way to mix all of these seperate samples into one single
> audio file based on the time at which each starts at. Any
> recommendations or thoughts would be appreciated. File format doesn't
> matter, I'll use whatever is easiest.
>
> Thanks,
> Erik Nomitch
>
> ex:
> at: 0.0 play /home/tux/.projects/elign/808/clap/808Clap-Kult_C2A.wav
> at: 2.0 play /home/tux/.projects/elign/808/clap/808Clap-Kult_C2S.wav
> at: 4.0 play /home/tux/.projects/elign/808/clap/808Clap-Kult_T1A.wav
Here is an idea, not tested... that is supported by Ecasound 2.5.2
-------------------- setup.ecs ----------------
-a:1 -i:playat,0.0,/home/tux/.projects/elign/808/clap/808Clap-Kult_C2A.wav
-a:2 -i:playat,2.0,/home/tux/.projects/elign/808/clap/808Clap-Kult_C2S.wav
-a:3 -i:playat,4.0,/home/tux/.projects/elign/808/clap/808Clap-Kult_T1A.wav
-a:all -o:alsa,default
-----------------------------------------------
then
ecasound setup.ecs
or for diagnostic purposes:
ecasound -c setup.ecs
start
See 'man ecsasound' for details, or any of the other fine
documentation.
Hope this helps,
Joel
--
Joel Roth
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
