Fernando Lopez-Lezcano wrote: > On Sun, 2008-12-14 at 15:20 -0600, The Other wrote: >> The Other wrote: >>> Then I looked into the /etc/pulse/default.pa file, and went into the >>> ### Load Audio Drivers section and put in this: >>> >>> load-module module-alsa-sink >>> load-module module-alsa-source device=hw:1,0 > > One more caveat... the load of kernel modules is done now in parallel > (if I understand things correctly so that the boot process is faster). > > That can have the unfortunate side effect that the order of the > soundcards is not necessarily always the same... check the Planet CCRMA > pages, there are instructions there on how to solve that. > > -- Fernando I found your post of September 17, 2008 entitled [Fedora-music-list] sound card order in fc9. These are the instructions you are referring to? I'll check them out tonight. This may explain why my device=hw:[Audigy2] lines didn't work after a reboot. I changed it to device=hw:1,0 and that seemed to work. cat /proc/asound/cards currently shows: 0 [Audigy2] 1 [I82801BAICH2] But this may be a lucky selection of cards when I rebooted, as you're stating. Oh well, I thought I had this fixed. As I said, later tonight I'll go through your references. Thanks Fernando, Stephen. _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
