Re: [FFADO-devel] [ANN] FFADO 2.0 Release Candidate 1 (1.999.40) available

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jack O'Quin wrote:
>> On Sun, 23 Nov 2008, Pieter Palmers wrote:
> 
>>> The FFADO team is proud to announce the first release candidate for
>>> FFADO 2.0.
> 
> I just tried the new libffado-2.0-rc1 with jack 0.113.3 (SVN) with my
> PreSonus FireBox on Ubuntu Hardy with the 2.6.24-21-rt kernel.  The
> ffado-diag script says I have the old 1394 stack.  Is that a problem?
> If so, how do I get the new one?

The old stack is exactly what you need.

> 
> The libffado.so got built and installed, but the JACK firewire backend
> could not find it, because ldconfig was apparently not run.  So, I ran
> ldconfig by hand.  Also, I notice there is no library versioning, yet.
>  Is that intentional?

Good question. Do you have any suggestions on how we should be doing it? 
I remember that someone tried to do it, but didn't succeed.

> 
> After fixing that, I am still unable to start JACK.  I tried resetting
> the bus via gscanbus, but it still does not come up.  I am attaching
> the ffado-diag output and the ffado-jack.log.

You are suffering from hostcontrolleritis. The O2 micro controller has 
some issues that cause it to stall under certain conditions.

There are few things that can help:
1) applying the cycle skip patch to the 1394 kernel sources:
http://subversion.ffado.org/wiki/TxSkipPatched
2) decreasing the amount of kernel space buffering will result in
this being less likely to occur. You can specify a config file:
http://subversion.ffado.org/wiki/ConfigFile
Setting the max_nb_buffers_xmit to 32 (or lower) should help. Note 
however that this will result in a higher sensitivity to xruns since 
this means that userspace has to refill the buffers every 32/2*8 frames.

Probably the best solution is to get a better host controller.

Greets,

Pieter

> 
>  $  jackd -Rv -P70 -d firewire -v6 -r48000 -p1024 -n3 2> ffado-jack.log
> 
> getting driver descriptor from /usr/lib/jack/jack_freebob.so
> getting driver descriptor from /usr/lib/jack/jack_oss.so
> getting driver descriptor from /usr/lib/jack/jack_firewire.so
> getting driver descriptor from /usr/lib/jack/jack_net.so
> getting driver descriptor from /usr/lib/jack/jack_alsa.so
> getting driver descriptor from /usr/lib/jack/jack_dummy.so
> jackd 0.115.3
> Copyright 2001-2005 Paul Davis and others.
> jackd comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
> 
> JACK compiled with System V SHM support.
> registered builtin port type 32 bit float mono audio
> registered builtin port type 8 bit raw midi
> clock source = system clock via clock_gettime
> start poll on 3 fd's
> loading driver ..
> new client: firewire_pcm, id = 1 type 1 @ 0x806ea80 fd = -1
> new buffer size 1024
> registered port system:capture_1, offset = 4096
> registered port system:capture_2, offset = 8192
> registered port system:capture_3, offset = 12288
> registered port system:capture_4, offset = 16384
> registered port system:capture_5, offset = 20480
> registered port system:capture_6, offset = 24576
> registered port firewire_pcm:C6_dev0_MidiIn, offset = 4096
> registered port system:playback_1, offset = 0
> registered port system:playback_2, offset = 0
> registered port system:playback_3, offset = 0
> registered port system:playback_4, offset = 0
> registered port system:playback_5, offset = 0
> registered port system:playback_6, offset = 0
> registered port system:playback_7, offset = 0
> registered port system:playback_8, offset = 0
> registered port firewire_pcm:P8_dev0_MidiOut, offset = 0
> ++ jack_sort_graph
> ++ jack_rechain_graph():
> +++ client is now firewire_pcm active ? 1
> client firewire_pcm: internal client, execution_order=0.
> -- jack_rechain_graph()
> -- jack_sort_graph
> starting server engine shutdown
> stopping driver
> server thread back from poll
> unloading driver
> freeing shared port segments
> stopping server thread
> stopping watchdog thread
> last xrun delay: 0.000 usecs
> max delay reported by backend: 0.000 usecs
> freeing engine shared memory
> max usecs: 0.000, engine deleted

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user

[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux