On Wed, Sep 24, 2008 at 12:40 PM, simone-www. io-lab. org
<cimo75@xxxxxxxxx> wrote:
> On Wed, Sep 24, 2008 at 11:34 AM, Pieter Palmers <pieterp@xxxxxxx> wrote:
>> Arnold Krille wrote:
>>> Am Mittwoch, 24. September 2008 schrieb simone-www.io-lab.org:
>>>> thank you for your interest in this desperate case ;)
>>>> yes everything is connected and powered on as supposed to be
>>>> the only thing i come to think about is: i am using a PCMCIA card
>>>> which has 3 ports but in Jack i don t have nay ohter choise than hw:0
>>>> , that may be the symptom of an unrecognized device?
>>>
>>> If your fw-card has three ports, there are two possibilities:
>>> a) pass hw:X with X in {0,1,2} in the jackd-commandline
>> note that the number of ports has nothing to do with the hw:x parameter.
>> the hw:x parameter designates the controller to use. All ports on one
>> controller are part of the same bus, and are treated the same.
>>
>> if you have a built-in controller, you might have to use hw:1.
>>
>> Greets,
>>
>> Pieter
>> _______________________________________________
>> Linux-audio-user mailing list
>> Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
>> http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
>>
> so far:
> i can t find gscanbus on the Fedora repos, but in Ubuntu i have it
> installed and jack/fa-66 give me the very same problems and in Ubuntu
> i can see the device.
yeaahhh! i got it running with a few tricks:
so the main problem is that i am not able to give the proper
permissions to my user to access the raw1394 and ieee1394
modules/devices.
Till now i was not able to run freebob/jack even with superuser
because root was not in the audio group, while my user is.
Now root is in the audio user and root can launch jack with freebob.Nice!
At this point i only need to figure out how to set the proper
permissions in /etc/udev/rules.d/ so that my user can access the
firewire device.
Thanks
Simone
>
>
>
>
> --
> .wmv , .wma , .pps along with all proprietary Windows formats won t be
> accepted and/or viewed....
>
--
.wmv , .wma , .pps along with all proprietary Windows formats won t be
accepted and/or viewed....
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
