On Mon, Aug 25, 2008 at 9:02 AM, Florian Faber <faber@xxxxxxxxxxx> wrote: > On Wednesday 20 August 2008 14:13:51 Dmitry Baikov wrote: > >> It is not a FW interface, but RME HDSP line has full-blown matrix >> mixer, and Multiface supports disconnected operation (never tried it, >> though). > > What do you mean with 'disconnect' - operating the Multiface without a > connected computer? That won't work. The mixer is on the interface > card. Seems, the mixer is in the external box. Disconnected mode in HDSP works as follows: 1) connect the box 2) set up mixer as you need 3) select "Diconnect Mode" (TotalMix feature) 4) disconnect the box It will route audio the way you set it up. References: http://www.rme-audio.de/forum/viewtopic.php?id=3041 http://www.rme-audio.de/forum/viewtopic.php?id=1161 and the manual. But I never tried it. And not sure it will work on linux, until somebody adds this feature to hdspmixer. Dmitry. _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
