Hartmut Noack wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hello, > > I have a multitude of issues with freebob on several computers/distros. > Here I only want to ask for help with FC9 plus CCRMA: > > I have a VIA-FW-Controller on a PCI-Card in a AMD64-box. Connecting my > Presonus Firebox to this sometimes works flawlessly and I had sessions > for several hours in 64Studio 2.1 on this box. > > But alas: in 4 out of 5 cases the box does not invoke the ieee1395: > raw1394 raw device initialisation. > tail -f /var/log/messages shows up stuff like "recieved ... during reset > ignoring" and does nothing. > > On FC9 with CCRMA-Kernel the best it does is: > "Error parsing configrom for node 0-00:1023" > > Then I get the beloved message: > > "ieee1394: raw1394: /dev/raw1394 device initialized" > > BUT: only /dev/raw1394 exists, ieee1394 does not. Thus jackd dies as > freebob tries to initialize the driver backend. > > I noticed also, that a dv1394 Device is created, which I have not seen > for some time now... > > Please consider to unlist the following causes for that: > > 1.) permissions: all is set properly I have good success with the same > setup in 64Studio > > 2.) presonus-trouble: the box works OK (see above) I tried it both > host-powered and with the power-supply attached to the box... What error message does freebob give? Can you post the output of "lsmod"? Greets, Pieter _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user