Thanks Peder, Chris, This is my first time to use Ardour, and I mistakenly thought that the Time Master button (lit green) was referring to which source to use as transport control in the button above Time Master. The values of that button are Internal, MTC, and Jack. Chris, on Rosegarden's Configure Rosegarden-Sequencer-MIDI Time Code Mode, should I set this to MTC Slave? Would that allow the BPM to be controlled by Ardour? Or should I be setting the MIDI Clock and System Messages to Accept Start, Stop, and Contnue to have BPM control by Ardour? I like using Jack Transport to control Rosegarden and Ardour, so on Rosegarden I have Jack Transport Mode set to Sync. Thank you, Stephen. On Mon, 2008-07-14 at 11:36 +0100, Chris Cannam wrote: > On Mon, Jul 14, 2008 at 10:59 AM, <peder@xxxxxxxxxxxxxx> wrote: > > So either you change tempo in Ardour by rightclick on the Tempo line, > > choose Edit and set it to 160 or you disable Ardour as time master > > (button below the sync setting, right of the secondary "beat" clock) > > and make sure Rosegarden is set as master. > > Only the first of these will work in practice, as Rosegarden does not > support JACK tempo master (nor, indeed, slave). > > > Chris > _______________________________________________ > Linux-audio-user mailing list > Linux-audio-user@xxxxxxxxxxxxxxxxxxxx > http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user