arisstotle.54695488@xxxxxxxxxxxxx wrote:
> --- gnome@xxxxxxxxxxxxx wrote:
> Kjetil S. Matheussen wrote:
>>> david:
>
>>>> David Griffith wrote:
>>>>> On Sun, 4 Nov 2007, ANDERSON GREGORY
> wrote:
>>>>>> I am looking to buy a MIDI keyboard controller but I
> am
>>>>>> having trouble coming up with a site that has
>>>>>> compatibility
> info on it. Could someone point me in the
>>>>>> right direction?
>
>>>>> Any MIDI keyboard will work as long as you have a MIDI interface that
>
>>>>> works. Trickiness comes into play with USB/MIDI keyboards. Those
> are
>>>>> essentially USB/MIDI interfaces tucked into a keyboard. As
>>>> previously-discussed here, USB/MIDI devices may or may not work with
>>>>> Linux. Roland/Edirol and Korg are two brands known to work.
>>>> When ALSA isn't fighting over which sound card to load in which order
> on
>>>> my system, the E-MU Xmidi1x1 works just fine.
>>> In your
> modules settings file (mine is /etc/modules.d/alsa), set:
>> I don't have
> an /etc/modules.d directory. I have an /etc/modprobe.d
>> directory.
>>
>
>>> alias snd-card-0 snd-<card1>
>>> alias snd-card-1 snd-<card2>
>>> etc.
>
>> I found a file called "sound" in the modprobe.d directory. It already
>
>> had an alias setting snd-card-0 to the intel sound driver. So I added
> an
>> alias to it for the snd-usb-audio. Restarting only brought up error
>
>> messages about usb device 2,2, and killed both the USB<>MIDI adapter and
>
>> my external flash card reader. So I decided to go the other way -
>>
> renamed the sound file to something else and restarted again. Then
>> everything
> came up.
>> So far, audio has been working since then, but won't really
> know for awhile.
>> Running GNU/Debian Linux ...
>
> use
> the vendor and product IDs from lsusb and lspci to give each alsa driver an
> index number to make sure that each driver gets put in the same spot each
> boot.
>
> in my modprobe.d/alsa file I have:
> options snd-usb-audio index=1,2,3
> vid=0x08bb,0x0763,0x0c45 pid=0x2902,0x0199,0x1
> 7fd
Hmmm, OK. Is that all one line in the alsa file? Not sure I understand
that. lsusb -v shows me this for my one USB audio device:
idVendor 0x041e Creative Technology, Ltd
idProduct 0x3f07
That's pretty clear about what's what. I gather I need a line like this
in the alsa file (index=2 to make it the second sound device, yes?):
options snd-usb-audio index=2 vid=0x041e pid=0x3f07
On the other hand, lspci -vn shows me this for the onboard audio controller:
00:1f.5 0401: 8086:24c5 (rev 03)
Subsystem: 1179:ff01
Flags: medium devsel, IRQ 11
I/O ports at 1c00 [size=256]
I/O ports at 18c0 [size=64]
Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
I guess the "8086:24c5" is the two numbers I need, minus the prefatory "0x"?
--
David
gnome@xxxxxxxxxxxxx
authenticity, honesty, community
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
