On Thu, Aug 02, 2007 at 12:13:40PM -0400, Paul Davis wrote: > ardour's use of busses+sends will be changing (in trunk) in the next few > months. the new model will much more closely parallel the way hardware > consoles tend to work. and yes, sends will have their gain level > controllable from the main fader by just clicking on its name in that > particular mixer strip. That's good news ! But I hope you will keep the flexible busses we have now. It should be not a great problem to combine the best of both worlds. As you describe it, it will be possible to switch individual track faders to control a send. This is very useful, but you also want to do this globally, e.g. to set up a monitor mix. Having to switch all faders one by one is no practical solution. There's a problem with Ardour's flexibility here: since it has no predefined sends, there's no place to put a button that would switch all faders to control any particular send. One solution would be to require that a send must go to a bus. This both provides a master control for the send, and a place to put a button that would switch all faders. -- FA Follie! Follie! Delirio vano è questo ! _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user