On 19 June 2007 at 8:09, peder@xxxxxxxxxxxxxx wrote: > I guess this is a bug of some sort, I'm just not sure who to blame :) > > Create two mono tracks > > Record something on track 1 > > Record something shorter on track 2 > > Add a TAP Eq on track 1 and a TAP Eq and SC4 mono on > track 2 with the SC4 disabled. > > Play from the beginning and notice how the first track > gets silent when track two stops > ------- > Remove/disable TAP Eq from track 1 and everything's fine > or > remove/disable TAP Eq from track 2 and everything's fine > or > enable SC4 mono on track 2 with the side effect that DSP load increases > as track 2 ends (this is actually how I encountered the problem in the =20 > first place; I was testing the latest JAMin when, during a passage =20 > when both my > vocal tracks that had the Eq/SC4 combo ended, things stopped working due > to DSP overload) > > If you replace SC4 with SC1 enabling it shuts off all sound. > > This is tried with the latest svn (2024) of Ardour and the latest releases > of TAP and SWH on an Athlon-XP 2000+ with 2.6.21.5-rt > > Can someone else confirm this? I've also had troubles with tracks going silent while using the TAP Eq and SC plugins. But, it's been a long time, like pre 0.99 ardour, since I've seen that. G'luck.... -- Kevin "The most amazing achievement of the computer software industry is its continuing cancellation of the steady and staggering gains made by the computer hardware industry...", Henry Petroski [can you say "Windows"?] _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
