Re: [LAU] MIDI connections (BCF2000 <--> ardour)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24 May 2007 at 12:25, Kevin Cosgrove <kevinc@xxxxxxxxx> wrote:

> On 24 May 2007 at 12:15, Kevin Cosgrove <kevinc@xxxxxxxxx> wrote:
> 
> > On 24 May 2007 at 18:07, "Clemens Ladisch" <cladisch@xxxxxxxxxxxx> wrote:
> > > Kevin Cosgrove wrote:
> > > > > You need to connect one of these two:
> > > > >   BCF2000:BCF2000 MIDI 1
> > > > >   BCF2000:BCF2000 MIDI 2
> > > > > to this:
> > > > >   ardour::mcu
> > > > 
> > > > Well, I tried every combination of inputs and outputs I could
> > > > think of, but it didn't work.
> > > 
> > > Try "aseqdump -p BCF2000:0" to see whether any data arrives.
> > > If it does, there is some problem with the connection to ardour.
> > 
> > I just tried that, and I get
> >
> > Waiting for data. Press Ctrl+C to end.
> > Source_ Event_________________ Ch _Data__
> >  28:0   Note on                 0 108 127
> >  28:0   Pitch bend              4   -8032
> >  28:0   Note on                 0 107 127
> >  28:0   Pitch bend              3   -8016
> [snip]
> > etc.
> 
> I just thought about this a little bit more.  My original
> problem is not that data won't come out of the BCF2000.  It
> works fine with ardour when ardour addresses the hardware as
> device="/dev/snd/midiC3D0".  But, when ardour relies on a MIDI
> patchbay to connect the ardour:mcu MIDI port to a port on the
> BCF2000, then the connection isn't made.  At this point my
> supposition for testing is that ardour listens fine and the
> BCF2000 talks fine, but a connection between the two isn't being
> made.
> 
> I'd like help debugging the connection issue, or confirming that
> it's not a connection issue.

I tried ardour 2.0.2 again with "28:BCF2000"'s "0:BCF2000 MIDI 1"
output connected to "129:ardour"'s "1:mcu" input and this time I
get one line of input traced:

mcu input: Channel 3 Pitch Bend 6147

At that point things seem to hang.  If I try to quit ardour I
get the dialog about saving first or just quitting.  But, after
selecting to just quit ardour doesn't quit, and I have to ctrl-c.
Again, communication seems to be hung somewhere, but where?

Any more thoughts folks?

Thanks...

--
Kevin


_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user

[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux