Damon Chaplin wrote: > On Thu, 2007-04-12 at 15:40 +0200, Robin Gareus wrote: >> minor detail - in the jack_process callback: >> >> add jack_port_get_total_latency(..) to Note[i].oscillator_offset; > > Can you explain that a bit more - why is it needed? imagine you "pipe" the output of your synth thru an effect that introduces a latency (delay). It might seem insignificant - but: if you use two of those synths with different Effects afterwards, you get phasing effects! similar if you have multiple output ports: http://jackaudio.org/files/docs/html/jack_8h.html#a38 [JACK]MIDI allows to timestamp midi-events. - So the synth-osc's themselves could be in sync. - try to start two of them, invert the polarity of one and check if the resulting signal is zero. (bitscope) If it is, add a LADSPA DJ-EQ (1901) to one of the channels, IIRC that introduces a latency of 3 samples on that channel and you should hear some phased signal. #robin _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
