Paul Davis wrote: > > you need to set the clock sync up. one of the two devices has to be the > master, one has to be a slave. there are GUIs to do this for later RME > devices, but for the DIGI 32/8, you are stuck (i think) with editing > text files or using the low level amixer command. i don't know what > mixer element (switch) needs toggling. i would suggest using the RME as > the master and the Alesis as the slave, but it doesn't matter much > either way. > > I can't understand the way amixer behaves. The ADAT works only with 48000 but it card appears to refuse that sample rate. Or am I wrong? Here is the console output: projektet@arvo:~$ amixer Simple mixer control 'Input Connector',0 Capabilities: enum Items: 'Optical' 'Coaxial' 'Internal' Item0: 'Optical' Simple mixer control 'Loopback Input',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Sample Clock Source',0 Capabilities: enum Items: 'AutoSync' 'Internal 32.0kHz' 'Internal 44.1kHz' 'Internal 48.0kHz' Item0: 'AutoSync' projektet@arvo:~$ amixer set 'Sample Clock Source' 'Internal 32.0kHz' Simple mixer control 'Sample Clock Source',0 Capabilities: enum Items: 'AutoSync' 'Internal 32.0kHz' 'Internal 44.1kHz' 'Internal 48.0kHz' Item0: 'Internal 32.0kHz' projektet@arvo:~$ amixer set 'Sample Clock Source' 'Internal 44.1kHz' Simple mixer control 'Sample Clock Source',0 Capabilities: enum Items: 'AutoSync' 'Internal 32.0kHz' 'Internal 44.1kHz' 'Internal 48.0kHz' Item0: 'Internal 44.1kHz' projektet@arvo:~$ amixer set 'Sample Clock Source' 'Internal 48.0kHz' Simple mixer control 'Sample Clock Source',0 Capabilities: enum Items: 'AutoSync' 'Internal 32.0kHz' 'Internal 44.1kHz' 'Internal 48.0kHz' Item0: 'AutoSync' _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
