Lee Revell wrote:
> On Tue, 2006-11-14 at 12:16 -0800, Brad Fuller wrote:
>
>> I sent this to PlanetCCRMA ML yesterday, no response. Thought someone
>> here could help.
>>
>> For some reason I'm getting the following error when using aplay:
>>
>> ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '1'
>> ALSA lib conf.c:3492:(_snd_config_evaluate) function
>> snd_func_card_driver returned error: No such device
>>
>> I believe there is some mixup during boot about my Midisport 8x8 (which
>> was 0) and the Delta 66 (which was card 1)
>> The Midisport doesn't seem to appear now.
>>
>>
>
> You must have changed something to cause snd-usb-audio not to get
> loaded.
>
>
>> For another weirdness, my modprobe is now:
>>
>> # cat modprobe.conf
>> alias eth0 3c59x
>> alias snd-card-1 snd-ice1712
>> options snd-card-1 index=1
>> options snd-ice1712 index=1
>> remove snd-ice1712 { /usr/sbin/alsactl store 1 >/dev/null 2>&1 || : ; };
>> /sbin/modprobe -r --ignore-remove snd-ice1712
>>
>> Would the (behind-my-back) removal of the midisport slip the Delta 66
>> into card 0 spot, but not tell others that the Delta 66 is now card 0
>> and not card 1? I don't care much about the Midisport, so why doesn't my
>> Delta66 work?
>>
>>
>
> It does work, it's just card 0 now. What aplay command line are you
> using? Do you have an .asoundrc? You shouldn't.
>
I know it's card 0 now. I don't know why midisport is not loading. I
didn't change anything in modprobe.conf myself. Unless something else did.
Nope, I don't have an .asourcerc
Here is an old FC3 modprobe.conf that worked:
alias eth0 3c59x
alias snd-card-0 snd-ice1712
options snd-card-0 index=0
install snd-ice1712 /sbin/modprobe --ignore-install snd-ice1712 &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-ice1712 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-ice1712
alias snd-card-1 snd-usb-audio
options snd-usb-audio index=1
#
alias snd-card-2 snd-virmidi
options snd-virmidi index=2
alias usb-controller uhci-hcd
alias ieee1394-controller ohci1394
options snd cards_limit=4
why is there an install and remove, and the new one has only a remove?
What happened to alsaconf, is that defunct now?
