Thanks to everyone who offered suggestions to my radio interference problem. I am hoping thay I'll get some more time on the weekend to investigate it further. Sorry for the delay in responding to the replies I received, but here goes... "Tim Howard" <tdhoward@xxxxxxxxx> wrote: > > Are you hearing radio stations, 60 Hz hum, static, or what? > Are you near florescent lighting? (like in the floor under your feet...) It's radio. I don't think lighting is the problem, nothing unusual around the equipment that wasn't there before. david <gnome@xxxxxxxxxxxxx> wrote: > Check your local electronics places for RF filters. A number of power > strips or surge protectors include them. Thanks for the tip, I may have to look into something like this. Vince Werber <ka1iic@xxxxxxxxxx> wrote: > What you are experiencing is called rectification... a major pain but > fixable with a little work... <...snip...> > You may need to buy some ferrite beads and place them on the cables where > they break out to your sound panels... generally you wind it around the > hot leads (not the ground) and reconnect them to there respective > terminals... > > Allot of work... yes... but it will work... I'm not sure what you mean by ferrite beads, or how to place them on the cables? What leads are the hot leads on the cables (I assume you are referring to the XLRs?) Sorry for being so dense, but I'd appreciate it if you could explain this to me in greater detail (like a two year old, say?) ;) Thanks again to everyone who replied! Jay
