After some problems configuring jackd, I achieved making use of this
card in the analog world, featuring 5ms of latency and superb audio
quality. However, I tried to connect the optical output to the optical
input on my minidisc and I am not being able to record anything.
While listening to music using analog out, there's laser in the
optical connector of the card. If I plug the cable there's laser in
the other side of the cable. When plugged into the minidisc it says
"NO SIGNAL".
I read about lowering the mixer level to 0 in order to enable the
S/PDIF out but that wasn't succesful here.
Jack's running like this:
$ jackd -R -dalsa -dhw:1 -r96000 -p256 -n2
I assumed that the same sound output was being forwarded to both the
analog output and the optical output as S/PDIF, but I might be wrong.
Any pointers welcome, thanks in advance.
Cordially, Ismael
--
Ismael Valladolid Torres "Il est vain de pleurer sur l'esprit, il suffit
de travailler pour lui." Albert Camus
http://digitrazos.info/
http://lamediahostia.blogspot.com/ OpenPGP key ID: 0xDE721AF4
Attachment:
signature.asc
Description: Digital signature
