Hi
I just compiled latest bristol, and have the same problem as others that
the gui window is all white. If I start without jack it seems to be ok
(didn't test it, since I really need jack) but with jack I get the all
white gui window. However it seems to open ok, it appears in jack, both
with midi and audio, and the output looks ok also:
atte@ajstrup:~/software/bristol/bristol-0.9.5/src$ ./startBristol -jack
-2600
spawning midi thread
parent going into idle loop
connected to :0.0 (81492f0)
display is 1024 by 768 pixels
Window is w 1024, h 768, d 24, 0 0 0
Using DirectColor display
masks are ff0000 ff0000 ff0000
Initialise the arp2600 link to bristol: 814e800
midi sequencer
Opened listening control socket: 5028
Client ID = 129
Queue ID = 0
Device name did not parse, defaults 128.0
hostname is localhost, bristol
port is 5028
Connected to the bristol control socket: 5
bristolengine already active
Accepted connection from 0 (3) onto 2 (5)
created 16 voices: allocated 16 to synth
engine MIDI channel 0
spawning audio thread
registering jack interface
Rescheduled thread: 95
initialising one arp2600
done create interface: 81490c0, 814e800
Found port alsa_pcm:playback_1
Found port alsa_pcm:playback_2
Default connection bristol:out_left to alsa_pcm:playback_1
Default connection bristol:out_right to alsa_pcm:playback_2
Found port alsa_pcm:capture_1
Found port alsa_pcm:capture_2
Default connection alsa_pcm:capture_1 to bristol:in
Any ideas? This is under debian/unstable...
--
peace, love & harmony
Atte
http://www.atte.dk | quartet: http://www.anagrammer.dk
| compositions: http://www.atte.dk/compositions
