Hi,
i have a rme hdsp madi card running and was wondering if i could make
use of the midi ports in it to gain control to some functions.
qjackctl does not shows my audio ports and not my midi ports when jack
is running. is this normal? i would have expected to see my raw midi
ports in the connections window....
my card is running fine otherwise...
heres some output:
vst:/mnt/testsuite # cat /proc/asound/cards
0 [default ]: HDSPM - HDSPM MADI
RME HDSPM MADI at 0xd0200000, irq 11
vst:/mnt/testsuite # cat /proc/asound/devices
4: [0- 0]: hardware dependent
9: [0- 1]: raw midi
8: [0- 0]: raw midi
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
0: [0- 0]: ctl
1: : sequencer
33: : timer
vst:/mnt/testsuite # amidi -l
Device Name
hw:0,0 MIDI 1
hw:0,1 MIDI 2
!!!!!BUT: aconnect does not show any writable or readable midi sources
vst:/mnt/testsuite # aconnect -i -o
client 0: 'System' [type=kernel]
0 'Timer '
1 'Announce '
could this be a driver problem or am i missing something here? i've
never worked with midi under linux so any help would be greatly
apreciated.
thanks and cheers,
Benjamin
--
-------------------
Benjamin Fabricius
German Student
Lawo AG
