On Sunday 30 April 2006 12:19, Esa Linna wrote: > In case, here's what /sbin/lsmod says: > > Module Size Used by > snd_emu10k1_synth 6912 0 > snd_emux_synth 34560 1 snd_emu10k1_synth > snd_seq_virmidi 6656 1 snd_emux_synth > snd_seq_midi_emul 6656 1 snd_emux_synth > binfmt_misc 11656 1 > nvidia 3690632 12 > raw 8992 1 > ipv6 248448 8 > snd_seq_oss 31616 0 > snd_pcm_oss 40736 0 > ipt_limit 2432 8 > snd_mixer_oss 17024 1 snd_pcm_oss > iptable_mangle 2816 0 > ipt_LOG 6528 8 > ipt_MASQUERADE 3328 0 > ip_nat 18996 1 ipt_MASQUERADE > ipt_TOS 2432 0 > ipt_REJECT 5504 1 > ip_conntrack_irc 6640 0 > ip_conntrack_ftp 7792 0 > ipt_state 1920 6 > snd_emu10k1 111268 4 snd_emu10k1_synth > snd_ac97_codec 90272 1 snd_emu10k1 > snd_ac97_bus 2048 1 snd_ac97_codec > ip_conntrack 52656 5 > ipt_MASQUERADE,ip_nat,ip_conntrack_irc,ip_conntrack_ftp,ipt_state > nfnetlink 6552 2 ip_nat,ip_conntrack > snd_pcm 82696 5 snd_pcm_oss,snd_emu10k1,snd_ac97_codec > snd_page_alloc 8840 2 snd_emu10k1,snd_pcm > snd_util_mem 4352 2 snd_emux_synth,snd_emu10k1 > snd_hwdep 8452 2 snd_emux_synth,snd_emu10k1 > iptable_filter 2944 1 > ip_tables 19968 8 > ipt_limit,iptable_mangle,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,ipt_stat >e,iptable_filter 3c59x 42024 0 > mii 5504 1 3c59x > af_packet 21768 2 > floppy 61252 0 > eth1394 19976 0 > ide_cd 40836 0 > cdrom 37792 1 ide_cd > ohci1394 34100 0 > ieee1394 95800 2 eth1394,ohci1394 > loop 16264 0 > supermount 34196 1 > via_agp 9728 1 > agpgart 34248 2 nvidia,via_agp > bt878 10424 0 > tuner 37416 0 > tda9887 13840 0 > bttv 158928 1 bt878 > video_buf 20996 1 bttv > firmware_class 10368 1 bttv > i2c_algo_bit 9352 1 bttv > v4l2_common 5888 1 bttv > btcx_risc 5000 1 bttv > tveeprom 13456 1 bttv > i2c_core 21648 5 tuner,tda9887,bttv,i2c_algo_bit,tveeprom > videodev 9472 1 bttv > snd_seq_midi 8096 0 > snd_rawmidi 22304 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi > snd_seq_midi_event 6912 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi > snd_seq 46800 11 > snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi,s >nd_seq_midi_event snd_timer 21892 3 > snd_emu10k1,snd_pcm,snd_seq > snd_seq_device 8332 7 > snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_emu10k1,snd_seq_midi,snd_r >awmidi,snd_seq snd 51776 18 > snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_pcm_oss,snd_mixer_oss,snd_em >u10k1,snd_ac97_codec,snd_pcm,snd_hwdep,snd_rawmidi,snd_seq,snd_timer,snd_seq >_device > > soundcore 9440 1 snd > realtime 5384 0 > commoncap 7168 1 realtime > pcspkr 3552 0 > psmouse 35844 0 > mousedev 11424 1 > usbmouse 5376 0 > usbkbd 6912 0 > usbhid 48160 0 > uhci_hcd 31888 0 > usbcore 118144 5 usbmouse,usbkbd,usbhid,uhci_hcd > ext3 130312 8 > jbd 51604 1 ext3 Hi Esa. /sbin/lspci for my Audigy2 soundblaster shows amongst other lines, one for the "gameport" on the card, as below. Input device controller: Creative Labs SB Audigy Midi/Game port (rev 04). and my lsmod shows 2 lines referring to this. emu10k1_gp 3584 0 gameport 4608 emu10k1_gp Neither of those shows up on your lsmod, so I presume that your card does not have a gameport. If you have a midi in connection, there is another module snd-mpu401. I don't have a midi in, but this may be the module that needs to be loaded. modprobe snd-mpu401 (as root) You also mentioned trying a usb midi keyboard. You will need to load another module, snd-usb-audio , and where you put it to autoload at bootup, depends on your distro, but a, modprobe snd-usb-audio , will load it. I use an Evolution MK-225C usb midi keyboard. With the snd-usb-audio module loaded Qjackctl shows my keyboard on the left hand side, and whatever I want to connect it to, ZynAddSubFx, etc, on the right. It does also show on the left side, Audigy MPU-401 (UART) , but this is probably with reference to the gameport on the card that can be used to play midi through, but I havn't used this. Nigel.
