On Tue, 2006-03-07 at 20:44 -0600, D R Holsbeck wrote: > Brings back memories :-( > > I have had a Digiface for, a few of years now. When I first setup my > unit, I was using a pci card for the interface. Which worked pretty > well. Then I got my thinkpad, and a pcmcia card. This did not work as > well, to start with. I fought for many a night to make it work, so I > could go mobile. I made sure the firmware loaded, channels were unmuted, > the card was seen by alsa .... The reseller I purchsed the card from, > even checked out the card, found nothing wrong, and returned a different > card and a new cord, just in case. I finally ended up shipping the whole > thing to Paul, so he could see for himself. After a couple of weeks it > was discovered that the pcmcia card I had recieved, had was new version, > which did not get along with the firmware code that hdsploader was > loading. > > So I guess you should check the hardware version of the pcmcia card. Did > you buy it new recently, I would guess so. Maybe the multiface box is > causing the issue. i do have some new "firmware" for the hdsp series too. its just that to date, nobody has needed it. CCRMA got several RME HDSP's around xmas, including a pcmcia device, and it has all just worked with current ALSA for them. --p
