On Thursday 05 January 2006 21:49, Laura Conrad wrote: > >>>>> "NH" == Nigel Henry <cave.dnb@xxxxxxxxxx> writes: > > NH> Hi Laura. I may be going down the wrong road here, but it appears > you have 2 NH> cards. The one on the MOBO, and the Creative one. > > NH> Do you have them both set up to speakers? > > No, only on the SBLive. > > NH> If so. Are you sure that when you are getting sound output, > NH> thats it's through the Creative card, and not the onboard > NH> one. > > When I run Timidity, or other sound apps, it comes out the speakers > attached to the SBLive. > > NH> Please run. cat /proc/asound/cards to see what order your > NH> cards are being loaded, and post it . > > [tmp]# cat /proc/asound/cards > 0 [Live ]: EMU10K1 - SBLive! Platinum [CT4760P] > SBLive! Platinum [CT4760P] (rev.5, serial:0x80401102) > at 0xc000, irq 9 1 [rev21 ]: VIA686A - VIA 82C686A/B rev21 > VIA 82C686A/B rev21 with AD1881 at 0xd000, irq 9 > > > NH> Do you have Qjackctl installed (the front end to Jack) ? If not, > I'd suggest NH> installing it, as you can play with a lot of settings. If > so. Have a look in NH> "Settings" and the box marked Interface. Compare the > HW # with the card NH> number for the Creative card from cat > /proc/asound/cards. > > Both 0. Hi Laura. Are you using the onboard soundcard? Perhaps you could disable it, either in the BIOS, or from jumpers on the MOBO as I have done. It might help to remove potential problems, as I see both cards are using irq9. This may or may not be causing a problem, but if you just have your Audigy card enabled, at least you are only dealing with that card. Nigel.
