Hi Michele,
Sorry for the delay.
On 10/2/05, Michele Spinolo <michele.spinolo@xxxxxxxxx> wrote:
> Hi Mark,
>
> >Yes, I tried this yesterday. It doesn't compile because my machine is
> >AMD64...
>
> you have to edit the Makefile and change the 9th line from:
> CFLAGS = -O2 -march=pentium4 -fno-fast-math
> to
> CFLAGS = -O2 -march=athlon64 -fno-fast-math
> then it should work fine.
Yes, it did. Thanks.
Now, the program doesn't seem to give me a way to talk to card #1
instead of card #0:
mark@lightning ~/CODE/rec_imp $ cat /proc/asound/cards
0 [CK804 ]: NFORCE - NVidia CK804
NVidia CK804 with ALC850 at 0xda103000, irq 225
1 [DSP ]: H-DSP - Hammerfall DSP
RME Hammerfall HDSP 9652 at 0xda000000, irq 58
mark@lightning ~/CODE/rec_imp $
so it's currently going through my onboard sound chip. Ideas? MAybe I
can change a line of code to hardwire it to card #1?
>
> >One other idea. Remove the two ADAT cables going to your ADI-8 Pro and
> >then loop on back on itself so that the ADAT output goes back to the
> >ADAT input. This will return whatever signal you send and allow to you
> >determine if the problem is in the HDSP 9652 or in the ADI-8 Pro.
>
> this is a good idea!
> I will try!
Did you try this yet?
- Mark
