On 5/21/05, Dave Phillips <dlphillips@xxxxxxxxxx> wrote: > Noah Roberts wrote: > > >I am trying to use qsynth to play midi files through jack. I have > >tried 3 different sound fonts. 2 make no sounds and the GM font just > >crashes with output 'Killed'. fluidsynth does the same when using > >that font. When I play the midi with pmidi -p 129:0 file.mid I see > >green lights flash and such, but no sound comes out. I turned up gain > >but nothing happens. Using Qjackctl I see that the connections are > >right, it should be making noise. Pmidi seems to be ok with it... > >But nothing comes out. I have tried 3 different fonts and 2 different > >files having totally different content (one heavy metal the other > >piano music). I don't know what to try next. > > > > > Noah, how are you starting qsynth ? Specifically, what fonts have you > tried ? I think fluidsynth has some troubles with large soundfonts, at > least I've been unable to use qsynth with the Fluid_R3 font. Works fine > with Creative's 8mbgmsfx.sf2 though. > > Youve connected qsynth's audio output to alsa_pcm in the Qjackctl audio > connections panel ? Volume is up on the mixer ? > > Please let me know what fonts you've tried. Details help. :) Using these soundfonts crashes qsynth immediately upon play: Hollywood.SF2 8Rock11e.sf2 This one I just tried crashes after a few seconds upon play: Vintage Dreams Waves v2.sf2 These ones don't output any sound: Chris_Percussion2.sf2 Saber_5ths_and_3rds.sf2 All but Vintage Dreams come from hammersound.net. I think it is actually fluidsynth that crashes. I try using it also and it just says "Killed". In gdb I get a segfault: (gdb) run -m alsa_seq -a jack -j -i /home/nroberts/Music/soundfonts/8Rock11e.sf2 /home/nroberts/Music/midi/holy_wars.mid Starting program: /usr/bin/fluidsynth -m alsa_seq -a jack -j -i /home/nroberts/Music/soundfonts/8Rock11e.sf2 /home/nroberts/Music/midi/holy_wars.mid (no debugging symbols found)...(no debugging symbols found)...[Thread debugging using libthread_db enabled] [New Thread 16384 (LWP 10101)] fluidsynth: warning: Ignoring sample *DlcmrC3: can't use ROM samples fluidsynth: warning: Ignoring sample *Vibraloop: can't use ROM samples fluidsynth: warning: Ignoring sample *BockClave: can't use ROM samples fluidsynth: warning: Ignoring sample *XyloE4Looped: can't use ROM samples fluidsynth: warning: Ignoring sample *ChanterAx1: can't use ROM samples fluidsynth: warning: Ignoring sample ShakuA2 #02: can't use ROM samples fluidsynth: warning: Ignoring sample RecorderAx2: can't use ROM samples fluidsynth: warning: Ignoring sample *SikuE2: can't use ROM samples fluidsynth: warning: Ignoring sample *HarmonicaA3: can't use ROM samples fluidsynth: warning: Ignoring sample *SynthStringsC4: can't use ROM samples fluidsynth: warning: Ignoring sample GunShot: can't use ROM samples fluidsynth: warning: Ignoring sample SineWave #10: can't use ROM samples [New Thread 32769 (LWP 10102)] [New Thread 16386 (LWP 10103)] fluidsynth: warning: Couldn't set high priority scheduling for the MIDI input [New Thread 32771 (LWP 10104)] [New Thread 49156 (LWP 10105)] Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 16386 (LWP 10103)] 0x00002aaaaabfef52 in fluid_voice_write () from /usr/lib/libfluidsynth.so.1 (gdb) bt #0 0x00002aaaaabfef52 in fluid_voice_write () from /usr/lib/libfluidsynth.so.1 #1 0x00002aaaaabf8b13 in fluid_synth_one_block () from /usr/lib/libfluidsynth.so.1 #2 0x00002aaaaabf83dc in fluid_synth_write_float () from /usr/lib/libfluidsynth.so.1 #3 0x00002aaaaabd6737 in fluid_jack_audio_driver_process () from /usr/lib/libfluidsynth.so.1 #4 0x00002aaaaafb82c2 in jack_port_type_size () from /usr/lib/libjack.so.0 #5 0x00002aaaab543e05 in pthread_start_thread () from /lib/libpthread.so.0 #6 0x00002aaaab543e9d in pthread_start_thread_event () from /lib/libpthread.so.0 #7 0x00002aaaab79dc00 in thread_start () from /lib/libc.so.6 #8 0x00002aaaac371a40 in ?? () (gdb) What I really don't get is the "Can't set high priority..." I have RT limits and jack is able to go realtime. Could its inability to do that be causing the troubles? Yes, volume is up and the connections seem to be made on their own. qjackctl connect dialog shows the connections established. Other jack stuff can output sound. I'll google for 8mbgmsfx and see what happens...
