I'm having really bad xrun problems in jack with my MAudio 24/96 card. I can't find any setting that doesn't result in 10's of xruns every few minutes which is obviously unacceptable. The latency doc in the linux audio users page at http://www.djcj.org/LAU/guide/Low_latency-Mini-HOWTO.php3 points out that most soundcards want to have an IRQ of 9, 10 or 11. When I cat /proc/interrupts (below), it appears that my card is at IRQ 19 which as I understand it puts it behind just about everything. Could that be the root of my xrun problem? If so, how can I make the card be on another interrupt. Regards, Bill cat /proc/interrupts CPU0 0: 738208 IO-APIC-edge timer 1: 379 IO-APIC-edge i8042 2: 0 XT-PIC cascade 8: 0 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 24226 IO-APIC-edge i8042 14: 71993 IO-APIC-edge ide2 15: 20598 IO-APIC-edge ide3 16: 43548 IO-APIC-level ohci1394, nvidia 17: 2157 IO-APIC-level SysKonnect SK-98xx 18: 0 IO-APIC-level libata 19: 177 IO-APIC-level ICE1712 21: 0 IO-APIC-level uhci_hcd, uhci_hcd, uhci_hcd, uhci_hcd, ehci_hcd
