Am Samstag 05 M?rz 2005 15:39 schrieb Spencer Russell: > On Sat, Mar 05, 2005 at 12:25:13PM +0100, Karsten Wiese wrote: > > Am Samstag 05 M?rz 2005 09:20 schrieb Spencer Russell: > > > OK, So as per these several suggestions, I've now tried the US428 > > > with a vanilla 2.6.11, a 2.6.11 with Ingo's preempt patch and > > > full preemption, nrpacks=4, apm and acpi not compiled in the > > > kernel, and without my usb ethernet card plugged in. I'm still > > > getting the "Sequence Error!" messages, then a couple seconds how long does it work until "Sequence Error!"? any hints that it happens in regular intervals? > > > later qjackctl dissapears. > > > > Please post the output of > > $cat /proc/interrupts > > maybe the usb-interrupt is also busy with something else... > > > > srussell@slingshot:~$ cat /proc/interrupts > CPU0 > 0: 23968893 XT-PIC timer 0/68893 > 1: 5085 XT-PIC i8042 0/5085 > 2: 0 XT-PIC cascade 0/0 > 7: 0 XT-PIC parport0 0/0 > 8: 3 XT-PIC rtc 0/3 > 10: 0 XT-PIC VIA686A 0/0 > 11: 9538103 XT-PIC yenta, uhci_hcd 0/38103 > 12: 36200 XT-PIC i8042 0/36200 > 14: 101724 XT-PIC ide0 0/1723 > 15: 13 XT-PIC ide1 1/12 > NMI: 0 > LOC: 0 > ERR: 0 > MIS: 0 > > > Hmm, it does look like my PCMCIA driver is also on the same > interrupt. I don't have any PCMCIA cards in now, but could that > still be causing problems? only if yenta is in front of uhci_hcd interrupt handler chain wise. just recheck after $rmmod yenta might make sure its gone with $lsmod post above. it looks like something keeps the usb's interrupt from being handled right in time. like bios: no idea..... harddisk: dma enabled? $hdparm /dev/hda post above also. video: recheck in text mode: $telinit 3 > > > Also make shure that any option in your bios sounding like "usb > > legacy support" is disabled. > > > > I have kind of a strange BIOS, where pretty much the only option > I have when I go into the setup is boot order, there isn't > anything about USB support. > > Thanks for the help, > Spencer >
