I'll Try This when my child takes a mid-day sleep. ;)
> Hallo,
> timg@xxxxxxxxxxxxxxx hat gesagt: // timg@xxxxxxxxxxxxxxx wrote:
>
>> OK here we go ...;)Prom going to annoy several of you with this ;)
>>
>>
>> -- OK guys and gals,
>> Working on my USB quattro issue...
>>
>> My .asoundrc file looks like this...(thanks to the alsa page)
>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> # quattro1 is pcm0 which has a maximum sample rate of 44100 and 16 bit
>> stereo
>>
>> pcm.quattro1 {
>> type hw
>> card 0
>> device 0
>> }
>>
>
> ...
>
>>
>> ctl.q41 {
>> type hw;
>> card 0;
>> }
>>
>> #----
>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> When I do cat /proc/asound/cards I get this.. (any way to kill that
>> modem
>> from showing up in alsa mixers)
>>
>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> 0 [Modem ]: ICH-MODEM - Intel 82801CA-ICH3 Modem
>> Intel 82801CA-ICH3 Modem at 0x2400, irq 10
>> 1 [I82801CAICH3 ]: ICH - Intel 82801CA-ICH3
>> Intel 82801CA-ICH3 at 0x1c00, irq 10
>> 2 [Quattro ]: USB-Audio - USB Audio Quattro
>> M Audio USB Audio Quattro at usb-00:1d.0-1, full
>> speed
>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>
>>
>> My bigest dillema are ...
>>
>> 1> How exactly do I modify my .asoind rc file to hit the right hw
>> devoce?
>
> Everywhere you find "card 0" or "hw:0" you need to replace this with
> "card 2" or "hw:2". Do not touch the "device 0" stuff, though.
>
>> 2> how do I start jackd?
>
> For example:
> $ jackstart/jackd -r 48000 -d alsa -d quattro
>
>> 3> How do start jackd in the other various modes?
>
> Replace "quattro" with the setup you want to use, e.g. "q4" or "q4b",
> and "48000" with other samplerates, if you want to use higher rates.
> Do not use 44100!
>
> Ciao
> --
> Frank Barknecht _ ______footils.org__
>
--
When asked the definition of "pi":
The Mathematician:
Pi is the number expressing the relationship between the
circumference of a circle and its diameter.
The Physicist:
Pi is 3.1415927, plus or minus 0.000000005.
The Engineer:
Pi is about 3.
