I don't know when you lose audio and when you don't. I actually asked an almost identical question on the Jack Developer's list about 60 days ago and got a long thread of answers and info in return. If you have some time then scan their archives and find it. I think it's and interesting read. Other than that all I can say is that xruns are never good and you need to adjust until you never get them at critical times. Good luck, Mark On Tue, 11 Jan 2005 12:34:02 -0500, Andres Cabrera <andres@xxxxxxxxxxxxxx> wrote: > Thanks Mark, > I guess it takes a little experimentation to find suitable settings. I'm > wondering though, that if the xrun reported says: > > delay of 5132.000 usecs exceeds estimated spare time of 5009.000; > restart ... > > All I'm losing is 0.1 ms of audio? These short xruns I see reported > aren't even audible on my good speakers, so I wouldn't mind (yes, I know > it's not ideal) losing this audio to have a lower latency. > > Cheers, > Andr?s > > Mark Knecht wrote: > > >On Tue, 11 Jan 2005 12:11:54 -0500, Andres Cabrera > ><andres@xxxxxxxxxxxxxx> wrote: > > > > > >>Hi Rui, > >>Thanks very much for your explanation. I remember there was a discussion > >>about this not too long ago, but I'm wondering if the xruns matter when > >>recording only. You could record at low latency, then raise it for > >>mixing and mastering (like you usually do on any system). Would this be > >>ok? Or would the recorded audio be missing small pieces? > >> > >>Cheers, > >>Andres > >> > >> > > > >You cannot know for certain. If the xrun is Ardour not delivering > >audio to the sound card then you get a click in the output audio. Not > >a killer problem. If the xrun is Ardour not acquiring audio from the > >sound card then the data is lost forever. Much bigger problem. > > > >I would recommend that you record with latencies just high enough to > >not be overly painful, and then push them higher when doing mixing if > >you are not interfacing with external signal paths for post > >processing. > > > >- Mark > > > > > > > > > > > >