On Sat, 2005-02-26 at 08:44 +0000, Rob Fell wrote: > Florin Andrei wrote: > > I let the system running the whole day and, when i came back home this > > evening, the power LED on the 1010 was turned off and the card was not > > passing any signal in or out. The OS was seeing it, i was able to run > > envy24control, but couldn't hear anything. Rebooting the system didn't > > help. > > After power-cycling the system, the card works fine again. > > My uptimes are measured in weeks and I've not seen this issue. Today i powered up the system and the LED on the 1010 didn't light up. I pulled the 9 VAC cord out then plugged it in and the LED lighted up. <sigh> I guess I'll send it back for a replacement. > > Also, is your card running hot like mine does? (epecially the left-hand > > side of the box) > > Yes, but not so hot you can't touch it. It's a well known Achilles-heel > of the delta 1010. Right, it's hot but not so i can't touch it. -- Florin Andrei http://florin.myip.org/
