On Fri, 25 Feb 2005 22:18:08 -0800
Florin Andrei <florin@xxxxxxxxxxxxxxx> wrote:
> I let the system running the whole day and, when i came back home this
> evening, the power LED on the 1010 was turned off and the card was not
> passing any signal in or out. The OS was seeing it, i was able to run
> envy24control, but couldn't hear anything. Rebooting the system didn't
> help.
This sounds like usual behavior when the external box loses power. Are
you sure that you didn't plug the external box into a plug on a switch?
> Also, is your card running hot like mine does? (epecially the left-hand
> side of the box)
Mine gets moderately warm there, but it's the top thing in my rack,
and underneath is just a patchbay.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh@xxxxxxxxxxxx
Without deviation from the norm, "progress" is not possible. - FZappa
