Hi, check this article http://www.linuxjournal.com/article/7024 and create/apdapt your .asoundrc Check also your modules.conf (Kernel 2.4) or modprobe.conf and related config-files (for me it's the /etc/modprobe.d/sound (kernel 2.6)). There you can configure the index of your cards and adapt your .asoundrc according to this. Good luck! Am Donnerstag, 17. Februar 2005 19:23 schrieb Atle Weibell: > Hi, > > Thanks! I didn't have the alsa-tools installed neither... > hdspconf find the 9632-card all fine, and with the mixer I got the > analog input level set, so that I now get sound from my piano from > analog in through the card and to analog out...but still no sound from > linux... :( > > atle > > On Thu, 2005-02-17 at 18:41 +0100, Marije Baalman wrote: > > Hi, > > > > did you try to use the hdspconf and hdspmixer tools? > > that may help to test whether the card is working. > > > > sincerely, > > Marije > > > > Atle Weibell wrote: > > >Dear sound folks, > > > > > >I recently bought a RME HDSP 9632 for use with MIDI sequencing. It works > > >fine with Cubase in W2K, but I have not been able to get any sound from > > >it in linux... > > > > > >I also have my old Creative Labs SBLive! card installed, for ip- > > >telephony and normal sound messages purposes. > > > > > >I run Fedora Core 3 with Gnome, reinstalled clean last weekend on a new > > >disk. The Sound Card Detection tool find both cards, and so does kudzu. > > >The modules loaded for them are snd-emu10k1 and snd-hdsp. the RME-card > > >is reported as Xilinx Corporation RME Hammerfall DSP. The Play test > > >sound button plays a sound for the SB-card, but not the RME-card. > > > > > >This is how it was until today, when I tried to get Rosegarden > > >installed. I downloaded, got some errors running configure, installed > > >some missing rpms, including KDE from fc3-cd and various devel-packages > > >from freshrpms.net with apt-get. I logged out from Gnome, and in with > > >KDE. Suddenly the sound was gone in the SB-card. Logged out from KDE and > > >in to Gnome, and there is no sound there neighter... > > > > > >Any suggestions that could point me in a direction would be appreciated. > > >If I at least could get the SB-card working again, I could go back to > > >Cubase, even if I really don't like to boot windows to do sequencing and > > >scores!! :( > > > > > >Hoping for help. > > > > > >regards, > > >Atle Weibell
