Am Montag, 14. Februar 2005 11:56 schrieb Markus Pott: > Hi everyone, > I would like to know if there is a way to get the pccard and multiface > running on a RL5c475 (rev 81). The card itself work as accpected on an > RL5c476 II (rev a8) ( only a few ctl issues ) > > outputs on my 64 bit gentoo DAW: > lspci: > > 0000:00:0b.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81) > 0000:02:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall > DSP (rev 0b) > > messages: > PCI: Failed to allocate mem resource #0:10000@ed010000 for 0000:02:00.0 > RME Hammerfall DSP: probe of 0000:02:00.0 failed with error -16 > > uname -a 2.6.10-gentoo-r6 #1 Tue Jan 25 20:17:49 CET 2005 x86_64 AMD > Athlon(tm) 64 Processor 2800+ AuthenticAMD GNU/Linux > > any ideas > > thks et b.rgds > > potty > > > meminfo: > MemTotal: 2056628 kB > MemFree: 190012 kB > Buffers: 342496 kB > Cached: 841692 kB > SwapCached: 0 kB > Active: 834744 kB > Inactive: 432156 kB > HighTotal: 0 kB > HighFree: 0 kB > LowTotal: 2056628 kB > LowFree: 190012 kB > SwapTotal: 1004020 kB > SwapFree: 1004020 kB > Dirty: 40 kB > Writeback: 0 kB > Mapped: 119284 kB > Slab: 572192 kB > CommitLimit: 2032332 kB > Committed_AS: 307444 kB > PageTables: 4500 kB > VmallocTotal: 536870911 kB > VmallocUsed: 18140 kB > VmallocChunk: 536851963 kB > HugePages_Total: 0 > HugePages_Free: 0 > Hugepagesize: 2048 kB > cat /proc/iomem > 00000000-0009f7ff : System RAM > 0009f800-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000c0000-000c87ff : Video ROM > 000f0000-000fffff : System ROM > 00100000-7ffeffff : System RAM > 00100000-00453996 : Kernel code > 00453997-005938af : Kernel data > 7fff0000-7fff2fff : ACPI Non-volatile Storage > 7fff3000-7fffffff : ACPI Tables > e4000000-e7ffffff : 0000:00:00.0 > e4000000-e7ffffff : aperture > e8000000-eaffffff : PCI Bus #01 > e8000000-e8003fff : 0000:01:00.0 > e9000000-e97fffff : 0000:01:00.0 > eb000000-ecffffff : PCI Bus #01 > ed000000-ed0007ff : 0000:00:0a.0 > ed001000-ed001fff : 0000:00:0b.0 > ed001000-ed001fff : yenta_socket > ed002000-ed003fff : PCI CardBus #02 > ed004000-ed005fff : PCI CardBus #02 > ed006000-ed0060ff : 0000:00:10.4 > ed006000-ed0060ff : ehci_hcd > ed007000-ed0070ff : 0000:00:12.0 > ed007000-ed0070ff : via-rhine > fec00000-fec00fff : reserved > fee00000-fee00fff : reserved > ffff0000-ffffffff : reserved Hello Markus, I have a laptop with a Ricoh Co Ltd RL5c476 II (rev ac) controller and my Multiface works fine with it. It works with my SuSE 2.6.8 Kernel and with a 2.6.10-mm1 Kernel. Maybe it's a problem with your /etc/pcmcia/config.opts
