Hi Dave. Can't say I know anything about using pcmcia, but I just wondered if you had the option lines set in /etc/modules.conf , and whether this may have something to do with it. options card_ID index=0 options card_ID index=1 options card_ID index=2 options snd-pdaudiocf index=3 obviously with the first 3's card ID's changed for your first 3 cards. I say this because before I had the options set, my usb midi keyboard was being detected first and registered in /proc/asound/cards , and the actual soundcard wasn't there. All the best. Nigel. J On Wednesday 31 Aug 2005 1:38 pm, Dave Phillips wrote: > Greetings: > > I've switched my laptop back to Planet C's RH9 and its 2.4.26 kernel. > The machine is much happier now. > > However, a problem has come up that did not exist on a former > identical installation: My PDAudioCF card is not recognized when I 'cat > /proc/asound/cards'. lsmod shows this report: > > [dlphilp@localhost dlphilp]$ lsmod |grep pdaudio > snd-pdaudiocf 10980 0 (unused) > snd-ak4117 7196 0 [snd-pdaudiocf] > snd-pcm 85952 0 [snd-pcm-oss snd-pdaudiocf snd-ak4117 > snd-usb-audio snd-cs4231-lib] > snd 48708 0 [snd-pcm-oss snd-mixer-oss > snd-seq-dummy snd-seq-oss snd-seq-midi snd-opl3-synth snd-seq-instr > snd-pdaudiocf snd-ak4117 snd-usb-audio snd-virmidi snd-seq-virmidi > snd-seq-midi-event snd-seq snd-cs4232 snd-opl3-lib snd-hwdep > snd-mpu401-uart snd-rawmidi snd-seq-device snd-cs4231-lib snd-pcm > snd-timer] ds 8776 2 [snd-pdaudiocf serial_cs > pcnet_cs] pcmcia_core 57504 0 [snd-pdaudiocf serial_cs > pcnet_cs ds yenta_socket] > > > But catting proc shows only: > > [dlphilp@localhost dlphilp]$ cat /proc/asound/cards > 0 [CS4231 ]: CS4231 - CS4231 > CS4231 at 0x534, irq 5, dma 1&0 > 1 [VirMIDI ]: VirMIDI - VirMIDI > Virtual MIDI Card 1 > 2 [M2x2 ]: USB-Audio - Midisport 2x2 > Midiman Midisport 2x2 at usb-00:07.2-1.2, full speed > > > I added these lines to /etc/modules.conf : > > alias snd-card-3 snd-pdaudiocf > alias sound-slot-3 snd-pdaudiocf > > I also tried manually loading snd-pdaudiocf, it seemed to work all > right and reported no error. Nevertheless, no PDAudioCF card appears in > /proc/asound. The card's little blue light is on, indicating that the > card is recognized by the PCMCIA system, but something else is wrong > somewhere. Any suggestions ? > > Best, > > dp
