On Mon, 2005-04-18 at 20:57, Michael Mossey wrote: > <quote who="Fernando Lopez-Lezcano"> > > On Mon, 2005-04-18 at 12:25, Michael Mossey wrote: > >> <quote who="Fernando Lopez-Lezcano"> > >> > On Mon, 2005-04-18 at 11:21, Michael Mossey wrote: > >> >> Thanks for the info-- another question: Is the idea here that kudzu > >> >> will > >> >> fail to detect the Audiophile 2496 if onboard sound is enabled? > >> >> Shouldn't > >> >> it be able to detect both sound systems? > >> > > >> > Yes, it should detect both. There could be several reasons for the > >> > failure. One is that for some reason the system does not see the card > >> as > >> > plugged in into the pci bus (which does not make sense as you say it > >> > works under windows). Do a: > >> > lspci -v > >> > Do you see an entry for the 2496? > >> > > >> > The other reason could be that the card has a pci revision number that > >> > is not recognized by the version of alsa that you have installed at > >> this > >> > point (is this the Planet CCRMA version? Or the original Fedora > >> > version?). > >> > > >> > Try loading (as root) the kernel module for the card and see what the > >> > load process says: > >> > > >> > /sbin/modprobe snd-ice1712 > >> > >> I'm not at this computer now, but when I did > >> > >> rpm -q alsa > >> > >> it said that alsa was not installed. I guess the FC3 installer doesn't > >> include it by default. Maybe that is my next step. > > > > "alsa" is not just one package, try: > > rpm -q -a | grep ^alsa > > Running that gives me: > > alsa-lib-1.0.6-3 > alsa-utils-1.0.6-3 > alsa-lib-devel-1.0.6-3 Fine, check the integrity of the install: rpm -V alsa-lib alsa-utils alsa-lib-devel > When I try to run alsamixer I get: > > alsamixer: error while loading shared libraries: libasound.so.2: cannot > open shared object file: No such file or directory > > I found libasound.so.2 in /lib. That's where it should be in fc3. > Adding /lib to my LD_LIBRARY_PATH did not > help. Symlinking /usr/lib/libasound.so.2 to /lib/libasound.so.2 did not > do anything. Very strange. Which alsamixer are you running? Do: which alsamixer That should return /usr/bin/alsamixer. Or run "/usr/bin/alsamixer" explicitly to make sure you are not running another binary. If the rpm verify command above does not report missing files and alsamixer is the original then I don't know what's going on. -- Fernando
