On Thu, 2004-09-30 at 08:53, Reuben Martin wrote: > >> --- Reuben Martin <MartinR@xxxxxxx> wrote: > >> > My guess is that devices on sound cards have a default sample rate, > > >> > bit rate or some other type of setting and when something accesses > >> > the device and changes one of those settings, it results in that > pop > >> > sound. > >> > >> I didn't think about that. I'll have to check and see if the 1010lt > >> has a default sample rate. The bad news is, if you are right, then > >> driver modifications won't fix the problem. > > > >Not necessarily. The driver can mute the output, change the card > setting, and unmute it again. > > I don't think muting the output will change anything if this is truly > the source of the problem. This a matter of changing the digital signal, > and nothing to do with the audio that is within the digital signal. > > -Reuben > I think it can be managed. If the driver ensured it was running 'silence' through the audio stream at the time it muted and changed the frequency, and then silence for a bit while the new frequency got stabilitied at the other end, then things would likely be very good. After all, the RME Windows hdspconf program can change the frequency back and forth with no problems, but the Linux equivalent, at least when tied to my AI-3 12 months ago, could not....
